[LOGic] Windows 7

Tue Feb 23 11:00:36 EST 2010

Carl: You can pick up a cheap straight paper cutter at Walmart and make 
perfect cuts to 3 or 4 at a time.

73' Lloyd, NX4W

--------------------------------------------------
From: "Carl J. Denbow" <n8vz.ars at gmail.com>
Sent: Monday, February 22, 2010 7:03 PM
To: "LOGic is open to all radio amateurs for discussion of LOGic 
loggingprogram" <logic at mailman.qth.net>
Subject: Re: [LOGic] Windows 7

> OK, Here's what I did as a stop gap measure.  I decided that I couldn't
> in good conscience send the cards without the proper dates, so I put
> them all in the recycling bin.  At that point I didn't have enough W7NN
> stock left to run another batch.  I then decide to do a LOGic ADIF
> export of the QSOs in question (actually I had done this earlier as a
> safety value).  I then imported them into a program called QSL Maker
> (free) and after about an hour of fiddling around got it to print three
> to a page on stiff photo paper.  Now, I'll have to individually cut each
> one out, since this isn't perforated paper.  The output looks very good
> and professional with all the fields populated properly.  The only
> unprofessional part will probably be my cutting! (hi hi)
>
> 73,
>
> Carl
> N8VZ
> =====================
>
> On 2/22/2010 6:17 PM, Mel wrote:
>> No
>>
>> Julio Peralta wrote:
>>
>>> Would the card be accepted for and award without the complete date?
>>>
>>> Julio, W4HY
>>> -----Original Message-----
>>> From: logic-bounces at mailman.qth.net 
>>> [mailto:logic-bounces at mailman.qth.net]
>>> On Behalf Of Carl J. Denbow
>>> Sent: Monday, February 22, 2010 3:08 PM
>>> To: LOGic is open to all radio amateurs for discussion of LOGic logging
>>> program
>>> Subject: Re: [LOGic] Windows 7
>>>
>>> Another update:  After all the cards were printed out (over 200), I
>>> noticed that for some reason the last digit in all the dates was left
>>> off.  That is "20 May 2008" became "20 May 200 "  I'm debating whether
>>> to go thru and edit each one by hand, or just send them to the bureau
>>> and let the receiving ham figure out the date from his or her log, if he
>>> or she cares enough.  I have no idea why this happened.  The last time I
>>> printed out cards with the same report, this did not happen.  That was
>>> probably back in LOGic 7 days and WinXP.
>>>
>>> 73,
>>>
>>> Carl
>>> N8VZ
>>>
>>> On 2/22/2010 12:29 PM, Paul wrote:
>>>
>>>> I don't know if this is the same problem or not, but on my XP machine,
>>>>
>>> which printed fine on a Brother HL-1440 and an HP 750, when I switched 
>>> to a
>>> new printer it only printed two cards. Problem seemed to be the 
>>> printable
>>> area of the new printer was different than standard .25" margins so it
>>> forced a new page break at two cards. Why 2 and not 3 I have no idea. 
>>> Got
>>> rid of that printer and returned to the others, problem resolved. May or 
>>> may
>>> not be your problem.
>>>
>>>>
>>>> 73,
>>>> Paul  W2EC
>>>>
>>>> --- On Mon, 2/22/10, Richard Miller<av8torrich at yahoo.com>   wrote:
>>>>
>>>>
>>>> From: Richard Miller<av8torrich at yahoo.com>
>>>> Subject: Re: [LOGic] Windows 7
>>>> To: n8vz.ars at gmail.com, "LOGic is open to all radio amateurs for
>>>>
>>> discussion of LOGic logging program"<logic at mailman.qth.net>
>>>
>>>> Date: Monday, February 22, 2010, 11:17 AM
>>>>
>>>>
>>>> Hi Carl:
>>>>
>>>> I don't think this is a Windows problem, as I have had the same problem
>>>>
>>> since XP. What I do is print one side, and then flip the card stock over 
>>> in
>>> the printer to get four cards per sheet. If you find a solution other 
>>> than
>>> the one I suggested, please post your results, so I too can benifit!
>>>
>>>> 73
>>>>
>>>> Rich, AJ3G
>>>>
>>>>
>>>>
>>>>
>>>> ________________________________
>>>> From: Carl J. Denbow<n8vz.ars at gmail.com>
>>>> To: LOGic is open to all radio amateurs for discussion of LOGic logging
>>>>
>>> program<logic at mailman.qth.net>
>>>
>>>> Sent: Mon, February 22, 2010 10:09:02 AM
>>>> Subject: Re: [LOGic] Windows 7
>>>>
>>>> I'm not sure if this is a Win7-64 problem or not, but I ran into a
>>>> rather strange anomaly yesterday.  I'll cut and paste here an email I
>>>> sent Dennis yesterday about this issue:
>>>>
>>>> "Today, for the first time in several years, I tried to print QSL cards
>>>> from LOGic using the appropriate report and W7NN stock.  I've done that
>>>> in the past without problem.  This time, however, it would only print
>>>> two cards per sheet rather than four.  I double-checked that I was 
>>>> using
>>>> the right report.  I also went into edit mode and checked that the
>>>> four-cards-per-sheet report was actually the four-cards-per-sheet
>>>> report.  It was. I then did a print preview which showed just
>>>> two-cards-per sheet.  My conclusion is that this is not a printer
>>>> problem, per se.  Any idea what might be up?  I running Win7-64 on my
>>>> ham shack machine, if that makes any difference."
>>>>
>>>> Do any of you have any idea what might be causing this problem?
>>>>
>>>> 73,
>>>>
>>>> Carl
>>>> N8VZ
>>>>
>>>> On 2/19/2010 6:18 PM, Ben Hatheway N6FM wrote:
>>>>
>>>>
>>>>> Windows 7 Professional 64 bit 9 com ports works great here.
>>>>>
>>>>> Ben
>>>>>
>>>>> -----Original Message-----
>>>>> From: logic-bounces at mailman.qth.net
>>>>> [mailto:logic-bounces at mailman.qth.net] On Behalf Of Joe Young
>>>>> Sent: Friday, February 19, 2010 1:48 PM
>>>>> To: logic at mailman.qth.net
>>>>> Subject: [LOGic] Windows 7
>>>>>
>>>>> I think that I read some comments that Logic 8 was running all OK on
>>>>> Windows 7. Is that the case? I am thinking about acquiring a Windows 7
>>>>> tower with a 4-port RS-232C I/O card for controlling Radio, Rotor, 
>>>>> Winkey
>>>>> etc. I have a setup now that does just that but using Windows XP. As I
>>>>> know little or nothing about Windows 7, I may be missing something 
>>>>> here.
>>>>> 73 de Joe W6RLL.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ______________________________________________________________
>>>>> LOGic mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/logic
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:LOGic at mailman.qth.net
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>
>>>>> ______________________________________________________________
>>>>> LOGic mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/logic
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:LOGic at mailman.qth.net
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>> ______________________________________________________________
>> LOGic mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/logic
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:LOGic at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> -- 
> Carl J. Denbow, N8VZ
> Athens, Ohio USA
> EM89wh
> www.n8vz.com
> www.78ohio.org
>
> PSK Forever!
>
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 