[LOGic] Windows 7

Mon Feb 22 18:17:10 EST 2010

No

Julio Peralta wrote:
> Would the card be accepted for and award without the complete date?
> 
> Julio, W4HY
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Carl J. Denbow
> Sent: Monday, February 22, 2010 3:08 PM
> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program
> Subject: Re: [LOGic] Windows 7
> 
> Another update:  After all the cards were printed out (over 200), I 
> noticed that for some reason the last digit in all the dates was left 
> off.  That is "20 May 2008" became "20 May 200 "  I'm debating whether 
> to go thru and edit each one by hand, or just send them to the bureau 
> and let the receiving ham figure out the date from his or her log, if he 
> or she cares enough.  I have no idea why this happened.  The last time I 
> printed out cards with the same report, this did not happen.  That was 
> probably back in LOGic 7 days and WinXP.
> 
> 73,
> 
> Carl
> N8VZ
> 
> On 2/22/2010 12:29 PM, Paul wrote:
>> I don't know if this is the same problem or not, but on my XP machine,
> which printed fine on a Brother HL-1440 and an HP 750, when I switched to a
> new printer it only printed two cards. Problem seemed to be the printable
> area of the new printer was different than standard .25" margins so it
> forced a new page break at two cards. Why 2 and not 3 I have no idea. Got
> rid of that printer and returned to the others, problem resolved. May or may
> not be your problem. 
>>   
>> 73,
>> Paul  W2EC
>>
>> --- On Mon, 2/22/10, Richard Miller<av8torrich at yahoo.com>  wrote:
>>
>>
>> From: Richard Miller<av8torrich at yahoo.com>
>> Subject: Re: [LOGic] Windows 7
>> To: n8vz.ars at gmail.com, "LOGic is open to all radio amateurs for
> discussion of LOGic logging program"<logic at mailman.qth.net>
>> Date: Monday, February 22, 2010, 11:17 AM
>>
>>
>> Hi Carl:
>>
>> I don't think this is a Windows problem, as I have had the same problem
> since XP. What I do is print one side, and then flip the card stock over in
> the printer to get four cards per sheet. If you find a solution other than
> the one I suggested, please post your results, so I too can benifit!
>> 73
>>
>> Rich, AJ3G
>>
>>
>>
>>
>> ________________________________
>> From: Carl J. Denbow<n8vz.ars at gmail.com>
>> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program<logic at mailman.qth.net>
>> Sent: Mon, February 22, 2010 10:09:02 AM
>> Subject: Re: [LOGic] Windows 7
>>
>> I'm not sure if this is a Win7-64 problem or not, but I ran into a
>> rather strange anomaly yesterday.  I'll cut and paste here an email I
>> sent Dennis yesterday about this issue:
>>
>> "Today, for the first time in several years, I tried to print QSL cards
>> from LOGic using the appropriate report and W7NN stock.  I've done that
>> in the past without problem.  This time, however, it would only print
>> two cards per sheet rather than four.  I double-checked that I was using
>> the right report.  I also went into edit mode and checked that the
>> four-cards-per-sheet report was actually the four-cards-per-sheet
>> report.  It was. I then did a print preview which showed just
>> two-cards-per sheet.  My conclusion is that this is not a printer
>> problem, per se.  Any idea what might be up?  I running Win7-64 on my
>> ham shack machine, if that makes any difference."
>>
>> Do any of you have any idea what might be causing this problem?
>>
>> 73,
>>
>> Carl
>> N8VZ
>>
>> On 2/19/2010 6:18 PM, Ben Hatheway N6FM wrote:
>>    
>>> Windows 7 Professional 64 bit 9 com ports works great here.
>>>
>>> Ben
>>>
>>> -----Original Message-----
>>> From: logic-bounces at mailman.qth.net
>>> [mailto:logic-bounces at mailman.qth.net] On Behalf Of Joe Young
>>> Sent: Friday, February 19, 2010 1:48 PM
>>> To: logic at mailman.qth.net
>>> Subject: [LOGic] Windows 7
>>>
>>> I think that I read some comments that Logic 8 was running all OK on
>>> Windows 7. Is that the case? I am thinking about acquiring a Windows 7
>>> tower with a 4-port RS-232C I/O card for controlling Radio, Rotor, Winkey
>>> etc. I have a setup now that does just that but using Windows XP. As I
>>> know little or nothing about Windows 7, I may be missing something here.
>>> 73 de Joe W6RLL.
>>>   
>>>
>>>
>>>
>>> ______________________________________________________________
>>> LOGic mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/logic
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:LOGic at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>> ______________________________________________________________
>>> LOGic mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/logic
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:LOGic at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>      
>>    
>