[LOGic] Logic8 and DXTELNET

[Hank Phillips]

Joe,

 

I may not have given you all the information - sri.  Within DXTelnet there
is a configuration screen:  configuration -> links

 

EXE Name = ddedupe

Link Topic = ddetopic

Link Item = ddeitem

 

DDEDUPE should be running, but can be minimized.

 

Eons ago, when I first started this, DXTelnet was a bit better about staying
connected than the telnet interface within Logic, since it had configurable
keep-alive and auto-reconnect.  Now that broadband Internet is everywhere,
those may not be as important as they were to me then.

 

Let me know if you are still having problems, and I will dig a bit deeper.

 

73,

 

Hank

AA4HP

 

  _____  

From: Joe Young [mailto:w6rll at yahoo.com] 
Sent: Saturday, February 20, 2010 4:00 PM
To: Hank Phillips
Subject: RE: [LOGic] Logic8 and DXTELNET

 


Hello Hank. Thanks for the info. I ran DDEdupe and set the values as below.
Then I hit apply. The window did not go away or respond with a message. In
the dxtelnet program configuraton, links, I have checked the box Enable link
and the file is C:\DXTELNET32\DDEDUPE\. Still no data transfer. When you
start up Logic8 do you start dxtelnet first? Does logic automatically
establish the data link to dxtelnet. I know I am close to geting this right
but still not there. thanks de Joe W6RLL.



--- On Sat, 2/20/10, Hank Phillips <aa4hp at titustek.com> wrote:


From: Hank Phillips <aa4hp at titustek.com>
Subject: RE: [LOGic] Logic8 and DXTELNET
To: "'LOGic is open to all radio amateurs for discussion of LOGiclogging
program'" <logic at mailman.qth.net>, "'Joe Young'" <w6rll at yahoo.com>
Date: Saturday, February 20, 2010, 1:11 PM

Have you configured DDEDUPE to bridge 16-bit to 32-bit applications?

 

Here is my setup, and it works.  

 

I think you will like DXTelnet as a quicker way to get to the front of the
line.

 

73,

 

Hank

 

AA4HP

 

 



 

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Joe Young
Sent: Saturday, February 20, 2010 2:47 PM
To: logic at mailman.qth.net
Subject: [LOGic] Logic8 and DXTELNET

 

At the  moment I am using Logic8 and auto-connecting on Logic8 start-up to a
DX cluster. I have DXTELNET and I would like to use it with Logic8. In
DXTELNET under configuration, links I have set EXEName to LOGIC and Link
Topic to DXTELNET. In Logic8 in Spot Log, Options I have checked the enable
DXTelnet interface box. I have used this version of DXTELNET to link to
other loggers and all worked OK. I am missing something here. Which of the
two programs do you start first? How do you connect, etc? I have not been
able to establish a data link between DXTELNET and Logic8. Thanks for
reading. 73 de Joe W6RLL.

 

 

      

______________________________________________________________

LOGic mailing list

Home: http://mailman.qth.net/mailman/listinfo/logic

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:LOGic at mailman.qth.net

 

This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

 

 

-------------- next part --------------