[LOGic] Logic and K3

[Glenn Anderson]

I went through this problem with Dennis last year and got no resolution. I
ran LP bridge while I was looking for a new logging program.

I switched to the DxLab's suite and never looked back. It works very well
with the K3, has a great PSK/RTTY module, and it's FREE.

http://dxlabsuite.com/

Glenn WB5TUF


-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Bill VanAlstyne W5WVO
Sent: Thursday, December 02, 2010 8:38 PM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: Re: [LOGic] Logic and K3

Hi Julio,

I'm sure Dennis knows that there isn't any native-mode support for the K3. 
:-) This is not exactly a state secret. It's not "my" problem; it's just 
something that he has chosen not to implement and release as a LOGic 8 
update, and I'm sure he has his reasons for making that choice. Maybe it 
will be part of LOGic 9, if there is a LOGic 9. I certainly hope so. The K3 
has been out for three years now, and is the universal DXpedition rig of 
choice. There's seven K3s working at ZL8X (Kermadec) right now -- but 
they're NOT using LOGic software. (They're using Win-Test.)

Bill W5WVO


-----Original Message----- 
From: Julio Peralta
Sent: Thursday, December 02, 2010 15:29
To: 'LOGic is open to all radio amateurs for discussion of LOGic logging 
program'
Subject: Re: [LOGic] Logic and K3

Have you contacted Dennis about the problems with the K3? He has been very
responsive when I contacted him about problems I had. You can generally
reach him by phone at the LOGic support line.

Julio, W4HY

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Bill VanAlstyne W5WVO
Sent: Thursday, December 02, 2010 8:40 AM
To: logic at mailman.qth.net
Subject: Re: [LOGic] Logic and K3

I am also using LOGic 8 with my K3, and it "works", sort of, using the K2
support mode. It reads mode and VFO frequency. There is no native support
mode for the K3, however, and there are a lot of things in LOGic that don't
work right with the K3. For example, try switching to the B VFO, or setting
the A and B VFOs to the same frequency, or going into Split mode using the
buttons on the LOGic screen. You can't. Those LOGic functions don't work on
the K3.

Now, you can say, OK, if you want to control all that stuff from the
computer, you can interpose TRX Manager, which has elaborate native-mode K3
support, between LOGic and the rig. True enough. But the controls mentioned
above exist on the LOGic screen, and they work for directly supported rigs.
They should work on the K3, and the K3 (as being one of the premier
transceivers on the ham market today) should be supported with dedicated
code. Why direct support for the K3 is still not considered a priority after

all these years is a mystery to me.

Bill W5WVO


-----Original Message----- 
From: Joe
Sent: Tuesday, November 30, 2010 17:48
To: logic at mailman.qth.net
Subject: [LOGic] Logic and K3

I use Logic with my K3 with no problem.  In my set up, I am using Ham Radio
Deluxe and DM780 and I have an LP-PAN to run with SDR and a Steppir SDA 100
to control my Steppir vertical.  I connect to the K3 using N8LP's software
that allows sharing of serial ports.



If you just want to connect the K3 and Logic that would make it much
simpler.



Good luck and 73,



Joe AF1E

______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html