[LOGic] LOTW in version 7

Julio Peralta jperalta4 at verizon.net
Thu Apr 22 17:46:39 EDT 2010


I read somewhere that LOTW is on a different server than the ARRL web page
server so there is no commonality between the two.

Julio, W4HY

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Carl J. Denbow
Sent: Thursday, April 22, 2010 3:55 PM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: Re: [LOGic] LOTW in version 7

Fellow LOGic Users:

I have LOGic 8.  I have been uploading frequently to LOTW in the last 
few weeks.  I have not encountered any problems.  Therefore, I would 
think the issue you folks are experiencing is not related to an embedded 
URL in LOGic.  When I read about the changes on the ARRL web site, I had 
assumed that I might encounter some problems, but I have not.  My last 
successful upload (and download) to LOTW was yesterday.  Go figure!

73,

Carl
N8VZ
====================================

Mel wrote:
> Arrl made changes to the site... that button won't work until Denis 
> makes a small change unless there is a way of configuring the URL that I 
> am unaware of. Some other logging programs have issues also.
>
>  From the LotW page:
>
> Mar 25, 2010: Synching or Downloading Log data -- Some LoTW users who 
> use N3FJP AC Log to upload their logs to Logbook of The World have been 
> experiencing difficulty.  The solution is to configure the logging 
> software to connect to the LoTW server.
>
> Open N3FJP AC Log program.
>
>     1. Select the "LoTW" tab at the top of the log form.
>     2. Select the tab "LoTW Server Settings" in the upper right of the 
> LoTW form.
>     3. In the box marked "LoTW Download URL:" replace the current URL 
> with this new URL
>
> https://p1k.arrl.org/lotwuser/lotwreport.adi?login=
>
> Click DONE.
>
>     1. Make sure that all other settings such as own call, username and 
> password, and station location are correct.
>     2. Now you should be able to upload and download data to LOTW using 
> the logging software utility.
>
> The N3FJP site < http://n3fjp.com/ > offers support for this program.
>
> Robert Brady wrote:
>   
>> I am useing logic8 and I still cant get in to LOTW the way I always have
>> at the top of the page I clicked on (QSL)that would give me (up export
and 
>> upload qso's to lotw.) then I went to (open LOTW site in Browser)
>>  but now it gives the arrl page and tells me the page not found
>>
>> ----- Original Message ----- 
>> From: "Jack" <k4wsb at arrl.net>
>> To: "LOGic is open to all radio amateurs for discussion of LOGic logging 
>> program" <logic at mailman.qth.net>
>> Sent: Tuesday, April 20, 2010 9:06 PM
>> Subject: Re: [LOGic] LOTW in version 7
>>
>>
>>     
>>> Could something have changed in your firewall?
>>>
>>>
>>> At 09:01 PM 4/20/2010, you wrote:
>>>       
>>>> Sante-
>>>>
>>>> One last try here-  I have not made any changes whatsoever in any
>>>> addresses to the ARRL LOTW.
>>>>
>>>> -Joe, NA9A
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: logic-bounces at mailman.qth.net
>>>> [mailto:logic-bounces at mailman.qth.net] On Behalf Of Sante - IK0HBN
>>>> Sent: Tuesday, April 20, 2010 1:03 AM
>>>> To: LOGic is open to all radio amateurs for discussion of LOGic
>>>> logging program
>>>> Subject: Re: [LOGic] LOTW in version 7
>>>>
>>>> I am sorry to report that the problem is still there...even (as I
>>>> always did since ever) launching the automatic operation Joe
>>>> talked
>>>> about, all I get is PAGE NOT FOUND.
>>>> Arrl has changed his page for LOTW, so is there a way to correct
>>>> with
>>>> the new Url the address in Logic?
>>>> I did not find any menu to do that task.
>>>> May be we should ask the League to put everything back as it was
>>>> before, so to avoid upsetting all the logging software....
>>>> Any hint will be appreciated... waiting for version 9 or 10 when
>>>> logig will handle multiple callsigns in a multi ops scenario in
>>>> our
>>>> homes... :-)
>>>> ciao
>>>> Sante
>>>>
>>>> At 05.46 20/04/2010, you wrote:
>>>>         
>>>>> Robert and Sante-
>>>>>
>>>>> I just tried the "Open LOTW Site in Browser" button and like you,
>>>>> also got to a "page not found" message on the ARRL site.
>>>>>
>>>>> I have never used that button before and don't know its purpose.
>>>>> Instead, use the "Export Process and Upload" button above the one
>>>>> you used.  That's all I have ever used and it does everything for
>>>>> you.  Try it, you'll like it!
>>>>>
>>>>> 73, Joe, NA9A
>>>>>
>>>>> -----Original Message-----
>>>>> From: logic-bounces at mailman.qth.net
>>>>> [mailto:logic-bounces at mailman.qth.net] On Behalf Of Robert Brady
>>>>> Sent: Monday, April 19, 2010 6:34 AM
>>>>> To: LOGic is open to all radio amateurs for discussion of
>>>>> LOGiclogging program
>>>>> Subject: Re: [LOGic] LOTW in version 7
>>>>>
>>>>> I am using Logic 8. if I go to (qsl) then to (open loTW site in
>>>>> browser) I
>>>>> get arrl but it says page not found that it has been removed
>>>>>
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Robert Carroll" <w2wg at comcast.net>
>>>>> To: "'LOGic is open to all radio amateurs for discussion of LOGic
>>>>> loggingprogram'" <logic at mailman.qth.net>
>>>>> Sent: Monday, April 19, 2010 7:21 AM
>>>>> Subject: Re: [LOGic] LOTW in version 7
>>>>>
>>>>>
>>>>>           
>>>>>> I also am having no issues with LOGIC and LOTW.  I am on quite
>>>>>>             
>>>> a
>>>>         
>>>>> few
>>>>>           
>>>>>> reflectors for various logging programs, and there have been
>>>>>>             
>>>>> scattered
>>>>>           
>>>>>> reports of problems.  But as one developer has pointed out,
>>>>>>             
>>>> LOTW
>>>>         
>>>>> is on a
>>>>>           
>>>>>> different server from the main ARRL server, and the LOTW
>>>>>>             
>>>>> addresses have
>>>>>           
>>>>>> not
>>>>>> changed.
>>>>>>
>>>>>> 73
>>>>>> Bob W2WG
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: logic-bounces at mailman.qth.net
>>>>>>             
>>>>> [mailto:logic-bounces at mailman.qth.net]
>>>>>           
>>>>>> On Behalf Of Joe Dubeck
>>>>>> Sent: Sunday, April 18, 2010 7:03 PM
>>>>>> To: logic at mailman.qth.net
>>>>>> Subject: Re: [LOGic] LOTW in version 7
>>>>>>
>>>>>> Sante-
>>>>>>
>>>>>> I uploaded logs a few days ago and again on 4/18/10 @ 22:57 UTC
>>>>>> and had no problems.  In fact the QSO I sent today was checked
>>>>>>             
>>>> as having been sent and also an "F" as received because that
>>>>         
>>>>> contact
>>>>>           
>>>>>> was already on LOTW.  So, I think something has changed at
>>>>>>             
>>>> your
>>>>         
>>>>>> QTH.
>>>>>>
>>>>>> Good luck.
>>>>>>
>>>>>> Joe, NA9A
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: logic-bounces at mailman.qth.net
>>>>>> [mailto:logic-bounces at mailman.qth.net] On Behalf Of Sante -
>>>>>>             
>>>>> IK0HBN
>>>>>           
>>>>>> Sent: Sunday, April 18, 2010 5:18 PM
>>>>>> To: logic at mailman.qth.net
>>>>>> Subject: [LOGic] LOTW in version 7
>>>>>>
>>>>>> Hi all,
>>>>>> is there a way to change the address to which Logic sends the
>>>>>>             
>>>>> .tq8
>>>>>           
>>>>>> file to LOTW? I just discovered Arrl has changed the address
>>>>>>             
>>>> and
>>>>         
>>>>>> Logic 7 is unable to send the file and worse it does not
>>>>>>             
>>>> Uodate
>>>>         
>>>>>> the
>>>>>> flag LOTW QSL SENT in Y.
>>>>>> This occurs also in version 8 as a friend who owns it told me.
>>>>>> TIA
>>>>>> Sante
>>>>>>             
>>> Jack Hartley
>>> K4WSB / VP2MSB
>>> DXCC Honor Roll
>>> QCWA OOTC
>>> "Celebrating 50 years in Ham Radio"
>>> ______________________________________________________________
>>> LOGic mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/logic
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:LOGic at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>       
>> ______________________________________________________________
>> LOGic mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/logic
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:LOGic at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>     
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>   

-- 
=======================
Carl J. Denbow, N8VZ
Athens, Ohio USA
EM89wh
www.n8vz.com
www.78ohio.org

PSK Forever!
=======================

______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




More information about the LOGic mailing list