[LOGic] K3 Driver

Sun Nov 29 08:52:07 EST 2009

I agree Bill. Logic is a great program. I've been a customer since the
beginning. The K3 is the best radio I've ever owned. They just don't work
together. All of the other logging programs support the K3 (even the free
ones), so I know it's possible.

I may have to check out DX Labs or Ham Radio Deluxe.

It would be nice to have support for the MMTTY engine as in Writelog too.

Glenn

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Bill Horner
Sent: Sunday, November 29, 2009 12:13 AM
To: LOGic is open to all radio amateurs for discussion of LOGiclogging
program
Subject: Re: [LOGic] K3 Driver

I have kept on using Logic despite the K3 problems.........
Two things........ I will never give up using the best logging software 
LOGIC and never give up using my K3......... I have the best of both 
worlds......... sure it would be nice to utilise all the Logic functions 
....... one day when Dennis is able to he will make it happen.......

Bill Horner
President
Oceania Amateur Radio Dx Group Incorporated
PO Box 612
Childers, 4660
Australia
Ph.. +61 7 41266220
Cellular +61 428877551

----- Original Message ----- 
From: "Greg" <ab7r at cablespeed.com>
To: "LOGic is open to all radio amateurs for discussion of 
LOGicloggingprogram" <logic at mailman.qth.net>
Sent: Sunday, November 29, 2009 3:51 PM
Subject: Re: [LOGic] K3 Driver

>I tried working with Dennis well over a  year ago on K3 support.  He tried 
>a
> couple things and then he gave up.  That's when I gave up using Logic.  I
> keep an eye on the reflector in case he changes his mind...but after over 
> a
> year....who knows.
>
> 73 and GL
> Greg
> AB7R
>
> ----- Original Message ----- 
> From: "W0SD Ed Gray" <w0sd at triotel.net>
> To: "LOGic is open to all radio amateurs for discussion of LOGic
> loggingprogram" <logic at mailman.qth.net>
> Sent: Saturday, November 28, 2009 9:05 PM
> Subject: Re: [LOGic] K3 Driver
>
>
>>I would suggest calling Dennis as you can get a lot more accomplished?
>> I have spoken to him in the past few days about the K3. The Kenwood 850
>> driver is the closest.  It does not do A>B and A/B.  The K2 driver does
>> not do Split and it does not do A>B and A/B.
>>
>> I am hopeful that Dennis will support the K3. It should not take much
>> work to get it all taken care of. I hope all of you with K3's will ask
>> Dennis to support it. The K3 is a very popular radio and will be around
>> a long time to come since there is still a lot that will be done with
>> firmware to continue to make  the K3 a better radio.  Amateurs IMHO are
>> really "smart" about using reviews and reflectors today and a search of
>> the Elecraft reflector will show in a heart beat that Logic does not
>> support the K3.  I would say 95% of the hams who read this are not going
>> to buy Logic. If Logic is to be sold to K3 owners all it will take is
>> some posts on the Elecraft reflector that Logic supports the K3 and
>> suddenly everyone who buys a K3 or has a K3 is a potential Logic User.
>> The longer the K3 goes unsupported the more posts that will show up
>> saying so.
>>
>> Logic works for all the modes, band and frequency changes presently. It
>> will also works fine to send CW with the K3. It turns the "SUB" RX on
>> and off.
>>
>> Although it will do CW messages or digital messages one weakness(nothing
>> to do with the K3 but all radios) with Logic is that it does not have a
>> "hot key" and/or you can not tap the key to stop a CW message but one
>> can only use the mouse. That is way to slow when you hear the station
>> between VOX or QSK and you can not stop your CW with out fumbling around
>> to try and get the mouse on "cancel" and click and even when you do
>> there is still a little delay. It is a far cry from Writelog, etc. etc.
>> in this category.  Also you really only have F1-F4 for messages and the
>> rest have to be done with the Mouse which is far from idea.
>>
>> Dennis though he had found a "HOT Key" Alt R but in fact it really only
>> works occasionally as Alt R most times actually causes another action,
>> ie a solid key in most cases.
>>
>> The bottom line I have been trying to work DX using logic as my logging
>> program and using the CW messages and it "lacks" because of the above
>> reasons and again it should be an easy thing to fix.
>>
>> I think I started with Logic IV and have found it great for a lot of
>> things; especially awards tracking and a place to dump all the contests
>> to, LOTW, etc.
>>
>> Thanks,
>>
>> Ed W0SD
>>
>
>
>
----------------------------------------------------------------------------
----
>
>
>> ______________________________________________________________
>> LOGic mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/logic
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:LOGic at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
----------------------------------------------------------------------------
----
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.426 / Virus Database: 270.14.85/2532 - Release Date: 11/28/09
> 07:45:00
>
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html