[LOGic] K3 Driver

[Glenn]

I've tried the K2 driver with very limited success. I get the get the "lost
communication" message and have to reset the interface on every other tune
command.

Keying CW via RTS is a disaster too. The whole program crashes and has to be
killed using task manager.


G

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Jeff KB2M
Sent: Saturday, November 28, 2009 11:43 AM
To: 'LOGic is open to all radio amateurs for discussion of LOGic logging
program'
Subject: Re: [LOGic] K3 Driver

I use K2 and it works fine here via a virtual comport.

73 Jeff kb2m


-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Glenn
Sent: Saturday, November 28, 2009 12:40 PM
To: logic at mailman.qth.net
Subject: [LOGic] K3 Driver

Is there a trick to getting Logic 8 to work with the K3?

I've tried the K2 and all of the Kenwood drivers and none of them work
properly.


Writelog, N1MM, and HRD work perfectly with the K3.

 Emails to PDA tech support have gone unanswered.

 

Is there another general purpose logging program that works with the K3 that
I can switch to?

 

73,

 

Glenn

WB5TUF

______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html