[LOGic] Rig set up.

[Ben Hatheway N6FM]

On the log form look for 1234 in the upper right corner. The 1 should be
read. This means that you are using rig #1. Select 2 or 3 for one of the
other ones. 

Ben

-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net] On Behalf Of Rick Tarbert
Sent: Thursday, November 19, 2009 5:40 PM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: [LOGic] Rig set up.



Hi all. I have 3 rigs. An IC746pro for 2m, IC-910 for 1296 and a flex
3000 for HF and 6m. I have a log set up for HF and 1 for VHF. I can set
up the rigs to communicate with Logic but I want to simplify Logic
itself. Is there a way to have logic read a rigs freq with out having to
make a seperate log for each band and associating the rig to that log?
Tnx for any help.
Rick AK3E
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html