[LOGic] ? Logic9

[Mel]

There IS an issue with Logic... but I'm so used to it, I forgot about it.

Icoms stop responding to polls if they are busy doing something else. If you 
spin the dial for a while it can cause a timeout. Doesn't happen often... 
but since I know about it I will pause from time to time out of habit.

Another issue with some rigs is if polling is enabled, CI-V Transceive mode 
should be off. Data collisions cause mis-read data... but I haven't seen it 
with modern Icoms... it was an issue with older stuff (and not just with 
Logic).

Other than that it seems to work fine. I don't have the timeout issue with 
DX4Win Writelog. Nor with Logger32, Commander or Log-EQF.


----- Original Message ----- 
From: "Dave Reed" <nx7f at arrl.net>
To: "'LOGic is open to all radio amateurs for discussion of LOGic logging 
program'" <logic at mailman.qth.net>
Sent: Sunday, March 22, 2009 3:16 PM
Subject: Re: [LOGic] ? Logic9


> The major recurring issue was the loss of communication between LOGic and
> the Pro3.  It was intermittent - but occurred often.  RFI as a possible
> source was tested and eliminated.  Other rig control programs worked fine,
> so my conclusion was that LOGic's rig interface was not acting properly.
>
> After two years of messing with it, I switched to a different logging
> program.  Obviously, I ultimately switched to a different rig - the K3.  I
> like LOGic enough that I re-installed it to use with the K3 and was
> surprised to find that they don't like each other very well.  I was even
> more surprised to read from a fellow K3 user that Dennis tried to make 
> LOGic
> interface with the K3 properly but "couldn't get it to work so he have up 
> on
> it."
>
> I don't have the Pro3 anymore, so that issue has been solved by me.  :-)
> The K3 issue will have to be solved by Dennis, however.
>
> Dave, NX7F
>
>
> -----Original Message-----
> From: Mel Martin [mailto:ve2dc at videotron.ca]
> Sent: Sunday, March 22, 2009 12:09 PM
> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program
> Subject: Re: [LOGic] ? Logic9
>
> I don't know about the K3, but the Icom drivers have been rock solid for
> years... what sort of issues were you having Dave?
>
>
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html