[LOGic] DESECHEO K5D

[Mel Martin]

Using a prefix of "K5D" will match, to use more common regex format, K5D*

"K5D_" will only match "K5D"

N6FM Ben wrote:
> Actually, no, I didn't. there are no other letters to be used after K5D, and
> it works with that call on a test basis...or did I miss something since I
> don't want k5DXX to go into Desecheo...
> 
> 
> Ben
> 
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Mel Martin
> Sent: Saturday, January 31, 2009 9:18 AM
> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program
> Subject: Re: [LOGic] DESECHEO K5D
> 
> I assume you used "K5D_" not "K5D" ?
> 
> K0DAN wrote:
>> Thanks Ben...OK, yeah, I see the difference. By copying a separate entry
> for 
>> just K5D, its dates don't contradict those of earlier valid prefixes.
>>
>> I just don't do these changes often enough for them to get up off the 
>> larning curve.
>>
>> Thansk for the tip.
>>
>> 73
>>
>> Dan
>>
>> PS While on the topic, are there any other recent edits necessary, say, in
> 
>> the past 12 months?
>>
>>
>> ----- Original Message ----- 
>> From: "N6FM Ben" <n6fm at oregonfast.net>
>> To: "'LOGic is open to all radio amateurs for discussion of 
>> LOGicloggingprogram'" <logic at mailman.qth.net>
>> Sent: Friday, January 30, 2009 1:13 AM
>> Subject: Re: [LOGic] DESECHEO K5D
>>
>>
>>> I made a copy of the existing entry in the prefix table  ( right click
> the
>>> plus sign) then on the result, removed the existing prefixes, added the 
>>> K5D
>>> prefix, then put in the date range. I did not modify the existing record.
>>> Test log entries before adding the date range showed that it works...
>>>
>>> Ben
>>>
>>> -----Original Message-----
>>> From: logic-bounces at mailman.qth.net
> [mailto:logic-bounces at mailman.qth.net]
>>> On Behalf Of K0DAN
>>> Sent: Thursday, January 29, 2009 10:38 PM
>>> To: logic at mailman.qth.net
>>> Subject: [LOGic] DESECHEO K5D
>>>
>>> With Desecheo K5D about to go QRV, I'm trying to set up the prefix table,
>>> etc., to make Logic recognize the special call.
>>>
>>> Every time I try this on my own, because I think I know how to do it,
>>> something goes wrong.
>>>
>>> So far I have added K5D to the KP5 prefix, with dates of 2/12/09-2/26/09.
>>>
>>> Is that all ther is to it (other than working them)?
>>>
>>> Any assistance greatly appreciated.
>>>
>>> Tnx es 73
>>>
>>> Dan
>>> K0DAN
>>>
>>> _______________________________________________
>>> LOGic mailing list
>>> LOGic at mailman.qth.net
>>> http://mailman.qth.net/mailman/listinfo/logic
>>>
>>> _______________________________________________
>>> LOGic mailing list
>>> LOGic at mailman.qth.net
>>> http://mailman.qth.net/mailman/listinfo/logic
>>>
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
>>
> 

-- 
Mel, VE2DC