[LOGic] No spots

[Mel Martin]

Can also happen if the Spot index file becomes corrupted. Delete all 
spots in the DB then try a Clean operation to force a re-index.

Jack McNees wrote:
> Bob,
> 
> No overlaps, no filter, had "my Continent" prefilter "on" and turned it off
> -- and still no spots in the spot log window...
> 
> Jack, K4IJQ
> 
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Robert Carroll
> Sent: Tuesday, January 20, 2009 4:46 PM
> To: 'LOGic is open to all radio amateurs for discussion of
> LOGicloggingprogram'
> Subject: Re: [LOGic] No spots
> 
> Jack-
> 
> I have bitten a number of time by no or incomplete spots.  I always remember
> that I have screwed this up from time to time, but usually forget how.
> 
> Here are a few things I remember:
> 
> Once I had an overlap in my freq tables--such as the upper end of a segment
> being higher than the lower side of the next higher segment.  I never knew
> WHY this fouled things up, but it did--not dumping all spots, but a good
> number.
> 
> Another time it had to do with having a filter set in the spotlog--or having
> one set improperly.
> 
> The one that USUALLY gets me is having a prefilter set in the spots.  I
> usually forget that I have set one or realize I have set an inappropriate
> one.
> 
> Those are the ones I can think of right now.  Let us kwno what you find.
> 
> 73
> Bob W2WG
> 
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Jack McNees
> Sent: Tuesday, January 20, 2009 4:34 PM
> To: logic at mailman.qth.net
> Subject: Re: [LOGic] No spots
> 
> I am.  I have version 92 and the tables fix...
> 
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Mel Martin
> Sent: Tuesday, January 20, 2009 3:46 PM
> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program
> Subject: Re: [LOGic] No spots
> 
> You need to be running the latest version... .92
> 
> 
> Jack McNees wrote:
>> My DX Summit window shows spots, my Spot Log window shows none.  I have
> the
>> latest Logic and tables updates installed.  In Spot Log window, Show All
> is
>> checked and Display Lock is off.  From what I read, that should show every
>> spot.  Any ideas?
>>
>>
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
>>
> 

-- 
Mel, VE2DC