[LOGic] backup and restore

[Mel Martin]

Phil... a nesting error is usually caused by an infinite recursion... 
but I can't figure how it's happening. Have you run a scan on your drive 
to check for directory corruption? It will take a while depending on 
disk size and probably be scheduled for the next time you do a restart. 
I would suggest you schedule a scan and let it run overnight. You should 
do this before you try anything else.

N0PB wrote:
> I have tried all the afore mentioned ideas. I re-tried them just to be 
> sure. I still get same results.
>  Regardless of what drive I use, USB drive,flash drive, etc.
> Thanks for the ideas.
>  
> 73,
>  Phil N0PB
>  
> 
>     ----- Original Message -----
>     *From:* K0DAN <mailto:k0dan at comcast.net>
>     *To:* 'LOGic is open to all radio amateurs for discussion ofLOGic
>     loggingprogram' <mailto:logic at mailman.qth.net>
>     *Sent:* Wednesday, February 11, 2009 12:34 PM
>     *Subject:* Re: [LOGic] backup and restore
> 
>     Another subtlety, especially if you back up to the local PC as well
>     as to other PC's on a network (or with USB drives, etc.), after you
>     click tools/backup-restore, hit the "Advanced" tab, then "Select".
>     It'll let you search for directories on your local PC (including
>     thumbdrives) as well as locations on your network. Once you select a
>     target lcoation for the backup, enter a name for your backup file
>     (use the current date), hit OPEN, and the click BACKUP. You have to
>     do this operation for each destination, but it works well, as pretty
>     intuitive, and is fast!
>      
>     Good luck es 73
>     dan
>     k0dan
> 
>         ----- Original Message -----
>         *From:* Kyle Chavis <mailto:wa4pgm at nelsoncable.com>
>         *To:* 'LOGic is open to all radio amateurs for discussion of
>         LOGic loggingprogram' <mailto:logic at mailman.qth.net>
>         *Sent:* Wednesday, February 11, 2009 7:26 AM
>         *Subject:* Re: [LOGic] backup and restore
> 
>         That's odd I've been using LOGic 8 with WIN XP for a while and
>         never had this problem. Click Tools>Backup/Restore, select the
>         drive and the backup is done in just a few seconds.
> 
>          
> 
>         Kyle WA4PGM
> 
>          
> 
>         *From:* logic-bounces at mailman.qth.net
>         <mailto:logic-bounces at mailman.qth.net>
>         [mailto:logic-bounces at mailman.qth.net] *On Behalf Of *Larry & Karen
>         *Sent:* Tuesday, February 10, 2009 11:10 PM
>         *To:* LOGic is open to all radio amateurs for discussion of
>         LOGiclogging program
>         *Subject:* Re: [LOGic] backup and restore
> 
>          
> 
>         Hi, Phil,
> 
>          
> 
>         You're probably already doing this, but with my Logic 8 I have
>         to first download the log to the hard drive and then take it
>         from there to the disc for a backup. It will store directly to a
>         flash drive if you choose that method.
> 
>          
> 
>         Larry K0IS 
> 
>             ----- Original Message -----
> 
>             *From:* N0PB <mailto:n0pb at starband.net>
> 
>             *To:* logic at mailman.qth.net <mailto:logic at mailman.qth.net>
> 
>             *Sent:* Tuesday, February 10, 2009 9:56 PM
> 
>             *Subject:* [LOGic] backup and restore
> 
>              
> 
>             I have had problems for some time now with backup and
>             restore in Logic 7.
> 
>              I have always got the following error. Backup compression
>             failed(C:\DOCUMEN~1\HP_ADM~1\LOCALS~1\TEMP\BAC323.TMP)
> 
>             I then get. Error 96"Nesting error." has occurred in
>             program   FRMBACKUPRESTORE.BACKUP,line 0.    Attempt to
>             continue? yes or no
> 
>              I can in no way get it to do a proper backup. The only way
>             I have been able to save my log is by exporting in ADIF mode.
> 
>             I have considered upgrading to Logic 8.
> 
>              Anyone know how to fix this problem in Logic 7?
> 
>             Is it still a problem in Logic 8?
> 
>              
> 
>             Thanks for any help.
> 
>              
> 
>             Phil N0PB
> 
>              
> 
>             ------------------------------------------------------------------------
> 
>             ______________________________________________________________
>             LOGic mailing list
>             Home: http://mailman.qth.net/mailman/listinfo/logic
>             Help: http://mailman.qth.net/mmfaq.htm
>             Post: mailto:LOGic at mailman.qth.net
> 
>             This list hosted by: http://www.qsl.net
>             Please help support this email list:
>             http://www.qsl.net/donate.html
> 
>         ------------------------------------------------------------------------
> 
>         ______________________________________________________________
>         LOGic mailing list
>         Home: http://mailman.qth.net/mailman/listinfo/logic
>         Help: http://mailman.qth.net/mmfaq.htm
>         Post: mailto:LOGic at mailman.qth.net
> 
>         This list hosted by: http://www.qsl.net
>         Please help support this email list: http://www.qsl.net/donate.html
> 
>     ------------------------------------------------------------------------
> 
>     ______________________________________________________________
>     LOGic mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/logic
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:LOGic at mailman.qth.net
> 
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
> 
> 
> ------------------------------------------------------------------------
> 
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
Mel, VE2DC