[LOGic] backup and restore

[K0DAN]

Another subtlety, especially if you back up to the local PC as well as to other PC's on a network (or with USB drives, etc.), after you click tools/backup-restore, hit the "Advanced" tab, then "Select". It'll let you search for directories on your local PC (including thumbdrives) as well as locations on your network. Once you select a target lcoation for the backup, enter a name for your backup file (use the current date), hit OPEN, and the click BACKUP. You have to do this operation for each destination, but it works well, as pretty intuitive, and is fast!

Good luck es 73
dan
k0dan
  ----- Original Message ----- 
  From: Kyle Chavis 
  To: 'LOGic is open to all radio amateurs for discussion of LOGic loggingprogram' 
  Sent: Wednesday, February 11, 2009 7:26 AM
  Subject: Re: [LOGic] backup and restore


  That's odd I've been using LOGic 8 with WIN XP for a while and never had this problem. Click Tools>Backup/Restore, select the drive and the backup is done in just a few seconds.

   

  Kyle WA4PGM

   

  From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net] On Behalf Of Larry & Karen
  Sent: Tuesday, February 10, 2009 11:10 PM
  To: LOGic is open to all radio amateurs for discussion of LOGiclogging program
  Subject: Re: [LOGic] backup and restore

   

  Hi, Phil,

   

  You're probably already doing this, but with my Logic 8 I have to first download the log to the hard drive and then take it from there to the disc for a backup. It will store directly to a flash drive if you choose that method.

   

  Larry K0IS 

    ----- Original Message ----- 

    From: N0PB 

    To: logic at mailman.qth.net 

    Sent: Tuesday, February 10, 2009 9:56 PM

    Subject: [LOGic] backup and restore

     

    I have had problems for some time now with backup and restore in Logic 7.

     I have always got the following error. Backup compression failed(C:\DOCUMEN~1\HP_ADM~1\LOCALS~1\TEMP\BAC323.TMP)

    I then get. Error 96"Nesting error." has occurred in program   FRMBACKUPRESTORE.BACKUP,line 0.    Attempt to continue? yes or no

     I can in no way get it to do a proper backup. The only way I have been able to save my log is by exporting in ADIF mode.

    I have considered upgrading to Logic 8.

     Anyone know how to fix this problem in Logic 7?

    Is it still a problem in Logic 8?

     

    Thanks for any help.

     

    Phil N0PB

     


----------------------------------------------------------------------------

    ______________________________________________________________
    LOGic mailing list
    Home: http://mailman.qth.net/mailman/listinfo/logic
    Help: http://mailman.qth.net/mmfaq.htm
    Post: mailto:LOGic at mailman.qth.net

    This list hosted by: http://www.qsl.net
    Please help support this email list: http://www.qsl.net/donate.html



------------------------------------------------------------------------------


  ______________________________________________________________
  LOGic mailing list
  Home: http://mailman.qth.net/mailman/listinfo/logic
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:LOGic at mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/logic/attachments/20090211/ac6fa5b9/attachment.html