[LOGic] QSOs from Previous Call

[Julio Peralta]

If you go into log form setup you can make a temporary change to OPERATOR by
putting you old call in that field. Then you can add old Q's. You can even
set it for not real time logging then change it all back when you're
finished.

Julio, W4HY 

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Gil Stauffer
Sent: Saturday, December 05, 2009 3:14 PM
To: logic at mailman.qth.net
Subject: [LOGic] QSOs from Previous Call

I've searched through HELP and the LOGic 8 manual but can not locate
instructions about this issue.

I would like to begin entering contacts made while I had a previous call
sign.  I lived in the same QTH so it is my understanding the contacts are
valid for various awards.

How can I integrate these contacts with my current log but from a different
call.  I would then like to upload the contacts to LOTW?

Has anyone had a similar issue?

Gil  WB3ESR
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html