[LOGic] QSOs from Previous Call

[Robie Elms]

Gil,

I believe you do this by changing the "operator".  This is found on the Log
form setup page,  under the general tab.   Take a look and see what you
think.

73,

Robie - AJ4F

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Gil Stauffer
Sent: Saturday, December 05, 2009 2:14 PM
To: logic at mailman.qth.net
Subject: [LOGic] QSOs from Previous Call

I've searched through HELP and the LOGic 8 manual but can not locate
instructions about this issue.

I would like to begin entering contacts made while I had a previous call
sign.  I lived in the same QTH so it is my understanding the contacts are
valid for various awards.

How can I integrate these contacts with my current log but from a different
call.  I would then like to upload the contacts to LOTW?

Has anyone had a similar issue?

Gil  WB3ESR
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html