[LOGic] Problem List with LOGIC 8

[Charette, Douglas]

I had similar problem using a TT Omni 6/Microkeyer, but it only affected
the Winkeyer.  Turns out that you had to have the CW speeds in both the
Microkeyer and the Winkey setup in Logic set to the same speed range or
else the Winkeyer would get confused and do stupid things.

73 Doug W5GA

-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net] On Behalf Of Rich Miller
Sent: Monday, October 27, 2008 5:46 PM
To: logic at mailman.qth.net
Subject: [LOGic] Problem List with LOGIC 8

Hi All:

I have had the following issues (Dennis is aware of them) and was
wondering
if anyone has a fix for these problems:


1. Radio 1 CAT drops Intermittently:
	- The problems happens approximately once every 5 - 15 Minutes.
	- The Rig is a FT-2000 and is interfaced through a Microham
MK2R+
(typically).
	- Problem also appears when serial cable is used and no
interface is
present.
	- N1MM Logger does not have this problem, thus I think it's
Logic-8
Specific.
	- Resetting RADIOS/ROTORS does allow me to regain control of
CAT,
but not for long.
	- RADIO 2 (FT-1000MP MKV) does not have this problem.
	- I am using VISTA!

2. No Auto Split Frequency Entry after hitting "Tab" Button (FT-2000):
	-When using the FT-2000 I am unable to auto-log split frequency.

3. Widows Distorted when Logic 8 Opens:
	-The various windows (tools) I used in Logic are distorted when
I
first open Logic.
	-Clicking on the distorted window corrects the problem.

4. Unable to Send Spots in DXSUMMIT.
	-  Error: "Posting to DXSUMMIT has not yet been implemented"



If anyone has any ideas on these issue's I would love to hear from you
about
it.


73

Rich, AJ3G



_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic