[LOGic] LOGic - Remote control and port sharing

[N6FM Ben]

Well, then I would suggest a remote desktop application like VNC from which
you can shutdown ARCP and start TRX, or merely disconnect the ports from
each (they do that) without shutting one down. 

What specifically do you wish the program to do??

Ben

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of K0DAN
Sent: Sunday, November 30, 2008 12:36 PM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: Re: [LOGic] LOGic - Remote control and port sharing

Thanks Ben, I have TRX MGR but unfortunately it doesn't do all that
ARCP2000 does, nor all that I need.

73

Dan
K0DAN

----- Original Message ----- 
From: "N6FM Ben" <n6fm at oregonfast.net>
To: "'LOGic is open to all radio amateurs for discussion of LOGic logging 
program'" <logic at mailman.qth.net>
Sent: Sunday, November 30, 2008 2:30 PM
Subject: RE: [LOGic] LOGic - Remote control and port sharing


> The TS-2000 only has one serial port. You can't control with two programs 
> at
> the same time.
>
> I would suggest obtaining TRX-Manager' use that instead of ARCP. It has a
> great number of features to control the 2000 (since the author owns one) 
> and
> can be linked to Logic. That way, setting the rig in Logic will cause TRX 
> to
> respond. Only one serial port is required.
>
> Ben
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of K0DAN
> Sent: Sunday, November 30, 2008 9:55 AM
> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program
> Subject: [LOGic] LOGic - Remote control and port sharing
>
> I have two rigs interfaced to LOGIC:
> a) An FT1000MP using a derived USB-Serial port
> b) A TS2000 using a "real" serial port
> Right now every thing is in the hamshack, local control. All this works
> fine.
>
> I'm in the process of remoting the TS2000 via WIFI.
> I'm using Kenwood's ARCP2000 control software, which requires a serial 
> port
> to interface the rig and PC (this steals the serial port from LOGIC).
>
> Need another serial port so the TS2000 can talk to LOGIC while also 
> talking
> to the ARCP2000 software.
>
> I searched the LOGIC archives but couldn't find any discussions on how to
> share serial ports. Or add a USB hub plus more derived USB/Serial ports?
>
> Any suggestions for "best way" to let the rig control software and LOGIC
> talk to the TS2000 simultaneously? ("Best way" =
> cheap/simple/inexpensive/reliable!)
>
> Tnx
> es 73
> Dan
> K0DAN
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
> 

_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic