[LOGic] Com port locks up still

[James C. Hall, MD]

Mel:

Nuts! It burped. Com port locked again after about 3 hours. I'll raise the
USB response to 'very fast' and add in more 'noise immunity' with the
Router.

I dunno - something just quirky with Logic on this one. I'll have have to
wait until tomorrow to check it further.

I wonder how Greg, K4KO is doing with this same problem?

73, Jamie
WB4YDL

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Mel Martin
Sent: Wednesday, January 16, 2008 6:14 PM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: Re: [LOGic] Com port locks up still

 >defeats the purpose of the MK

Not completely... but it was just to confirm that it is a issue with the 
USB COM port.

I'll have to get on... but things haven't been going so well here... 
just before Christmas, the power supply in my IC781 died... and I've had 
terrible service from Icom in Canada in the past... and none of the US 
outfits wants to fix it... and yesterday my Alpha 87A started giving 
problems... so I'm down to my barefoot 746Pro ;-)

James C. Hall, MD wrote:
> Mel:
> 
> Non-USB serial port ? Surely you jest ! HI Actually, yes, I do but it
> defeats the purpose of the MK. You were quite right about the USB response
> time. It was set for standard with options for fast and very fast - I
chose
> fast. So far after an hour and a half, no problems with the com port
> (virtual) holding. I just worked Easter Island on 20M CW and it worked
just
> fine. I'm going to just keep it on for the evening and dare it to burp !
HI
> 
> 73, Jamie
> WB4YDL
> 
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Mel Martin
> Sent: Wednesday, January 16, 2008 5:51 PM
> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program
> Subject: Re: [LOGic] Com port locks up still
> 
> I think Logic uses a commercial library for the serial communications...
> 
> I doubt Dennis wrote code from scratch... way too much trouble... OTOH, 
> Logic has been around for a long time.<
> 
> Do you have a regular (Non-Usb) serial port on your machine?
> 
> James C. Hall, MD wrote:
>> Mel:
>>
>> I'll check on that but I already bounced it off of Joe Subich at
microHAM.
>> He felt like there was something screwy with the way Logic was handling
> com
>> ports. But I'll definitely look this over. On the Logic side, I did
> decrease
>> the polling interval from the default 2 seconds to 1 second. The AVG
>> antivirus is now gone off the computer.
>>
>> So far, so good. The com port still works. <fingers crossed>
>>
>> 73, Jmaie
>> WB4YDL
> 
> 
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
> 
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic