[LOGic] Logic 8 with microHam MK

[James C. Hall, MD]

I'll check it out, Mel, but for now, I can't argue with success. Looks good.

73, Jamie
WB4YDL

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Mel Martin
Sent: Sunday, January 13, 2008 8:51 PM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: Re: [LOGic] Logic 8 with microHam MK

Hmm... you should have to re-patch to get all the fixes. something's 
fishy... When I did that I was back at an old version that lacked 
certain essential features that Dennis had added... perhaps you have a 
relatively recent CD,  but your version should be older. You can check 
in the usual way...


James C. Hall, MD wrote:
> Mel:
>
> You da' man ! All that seems to be required is an over-install of the
Logic
> 8 CDROM and choose yes to over-writing whatever file. You're left with a
> repaired CURRENT version, tables and all. So far, after running for a
couple
> of hours, all is well.
>
> Thanks again.
>
> 73, Jamie
> WB4YDL
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Mel Martin
> Sent: Sunday, January 13, 2008 6:06 PM
> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program
> Subject: Re: [LOGic] Logic 8 with microHam MK
>
> Easiest way is to re-install from your CD into the same directory then 
> reapply an earlier version if you have it. That way settings and license 
> are preserved. I still have .78 here... but you might want to go back a 
> few versions....
>
> First you do a backup (or 2) first.... and make a copy of the whole 
> Logic directory tree to keep for a few weeks in case you find you have 
> forgotten something or to revert to the current version.
>
> The only thing to watch for are customized reports and custom updates to 
> the Prefix table. If you need to preserve these it can get more 
> complicated. If you still have the problem... just copy the saved 
> directory tree back over it and you will be back where you started... or 
> you can re-apply the latest update.... should come to the same thing 
> unless you have made a lot of customizations.
>
> In any case, it's a good dry run for the inevitable day when the disk 
> drive dies ;-)
>
>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
>   

_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic