[LOGic] Logic 8 with microHam MK

[James C. Hall, MD]

Mel:

Should I reinstall Logic 8 in a different directory ? Or, is there an easy
way to back-grade ?

73, Jamie
WB4YDL

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Mel Martin
Sent: Sunday, January 13, 2008 5:43 PM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: Re: [LOGic] Logic 8 with microHam MK

Jamie, I can't think of what could be wrong... but the first thing I 
would do is go back to an earlier version of Logic and confirm the 
problem corresponds to the update. If it does, you will have to contact 
Dennis and find out if he has done any work with the serial interface.

James C. Hall, MD wrote:
> Hello All:
>
> I am having trouble since upgrading to the latest maintenance release of
> Logic 8 with the serial port to the rig timing out at irregular times. I
use
> a microHAM microKeyer with virtual serial port 7 as the rig control port.
> What happens is that the program will work well for awhile and then
suddenly
> quit talking to the rig with the error "POLLING DISABLED: 0 characters in
> buffer". There were no changes in the radio setup. Occasionally when this
> occurs, it will command my radio to do certain things such as go into
memory
> mode. My radio is a Yaesu FT-1000MP Mark V. The microHAM MK is version 1
and
> has the latest firmware and Router upgrade.
>
> It does not do this at all with any other program - ie. MixW, N1MM Logger.
I
> can run all day on these programs without communication problems with the
> rig. Once the com port ceases to communicate in Logic, it requires a
> computer reboot to regain the com port function - it will NOT work with
the
> above programs unless I do. I also verified that there was no interfering
> program by running Logic without startup programs running (via
'msconfig').
> Computer is a WinXP system with Asus A8V mobo, 2GB RAM, Opteron 185 CPU -
no
> over-clocking. 
>
> I've used Logic since the early days and I've never run across this
problem.
> Like I said, it only started when I updated to the most recent maintenance
> release.
>
> I would appreciate any help.
>
> 73, Jamie
> WB4YDL
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
>   
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic