[LOGic] Frequency in Logbook

[K0DAN]

I had this issue (or something similar) with my FT1000MP years back...all 
would appear to work OK as to freq + mode, but sometimes I found QSO's 
logged with wrong freq/mode.

Eventually tracked this down to me using the rig in memory mode (tuning from 
memory channels) rather than the band/VFO mode. This was years ago, and 
perhaps LOGIC changed, but as long as I was operating by selecting bands, 
then VFO, the logging always works correctly.

Not sure this is the case with for Icom, but it might be worth checking.

Your other item, ie putting freq into log form w/o user intervention is, I 
think, a design philosophy which ou'll have to ask Dennis about...the 
thinking, I believe, is to make the decision to actually LOG something by 
hitting the mouse or keys.

Good luck & 73
Dan
K0DAN

----- Original Message ----- 
From: "Stan" <k9iuq at verizon.net>
To: "LOGic is open to all radio amateurs for discussion of LOGic logging 
program" <logic at mailman.qth.net>
Sent: Sunday, February 10, 2008 9:37 AM
Subject: Re: [LOGic] Frequency in Logbook


> The Real time mode is on. But It isn't "realtime".The log form only gets 
> the freq and mode when I hit tab from the call field or double click on 
> freq field.
>
> The little rig window is realtime. I can spin my radio's vfo and the rig 
> control window frequency changes. BUT the freq in the log form does not 
> change. Same with mode change from radio.
> The log form doesn't catch a mode change or freq change in "real time". At 
> least it doesn't on my setup.
>
> Stan K9IUQ
>
> Mel Martin wrote:
>> On the log form menu, select Log, Reat Time Mode, On
>>
>> Stan wrote:
>>>    Is  there  a  way  to make Logic put the frequency in the Logbook 
>>> form
>>>    automatically?
>>>    The  way  it  is  working  for  me  now   - I have to double click 
>>> the
>>>    frequency field to get
>>>    the  form to read the freq and mode from the radio. Sometimes I 
>>> forget
>>>    and the contact gets logged with
>>>    wrong  frequency  and  mode.  Most irritating and this would be a 
>>> REAL
>>>    pain in a contest.
>>>    Yes,  Logic  is  interfaced to my radio and will put the freq and 
>>> mode
>>>    into the form IF I double click the freq field. Needs to be 
>>> automatic.
>>>    Stan K9IUQ
>>> _______________________________________________
>>> LOGic mailing list
>>> LOGic at mailman.qth.net
>>> http://mailman.qth.net/mailman/listinfo/logic
>>>
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
>>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>