[LOGic] Frequency in Logbook

[Stan]

I am using a Icom Pro III and USB II interface. I just found out that 
using tab from the call field will put the freq and mode from the radio 
into the fields.
I had been using the mouse to go from field to field. Apparently the Log 
form doesn't read the freq and mode in "realtime", it reads only when 
you use the tab key or double click
the freq field.

This is confusing to me and has caused me to log the wrong freq and mode.

My previous log - HamRadio Deluxe-  reads the freq and mode in real time 
making it impossible to log the wrong freq or mode.

Stan K9IUQ





aluscre wrote:
> Stan
>
> Which model of  radio are you interfacing to?
>
> Anthony
>
> wrote:
>>    Is  there  a  way  to make Logic put the frequency in the Logbook 
>> form
>>    automatically?
>>    The  way  it  is  working  for  me  now   - I have to double click 
>> the
>>    frequency field to get
>>    the  form to read the freq and mode from the radio. Sometimes I 
>> forget
>>    and the contact gets logged with
>>    wrong  frequency  and  mode.  Most irritating and this would be a 
>> REAL
>>    pain in a contest.
>>    Yes,  Logic  is  interfaced to my radio and will put the freq and 
>> mode
>>    into the form IF I double click the freq field. Needs to be 
>> automatic.
>>    Stan K9IUQ
>> _______________________________________________
>>   
>