[LOGic] Select Criteria for awards?

[2._kg8ms]

Hi Tim

Instead of running an award report try running a log report.  Award reports 
print progress information.
STATE  reports show progress for WAS not RIG. I have a user field set up to 
track how I receive qsl cards (buro,direct, manager, etc)
when I filter my log looking for qsl rcvd via buro I get 108. when I run a 
DXCC report  with qsl rcvd via buro I get 166, when I
run a LOG report with  I get 108.

73, Margo KG8MS

----- Original Message ----- 
From: "NZ8J" <nz8j at woh.rr.com>
To: "'LOGic is open to all radio amateurs for discussion of LOGic logging 
program'" <logic at mailman.qth.net>
Sent: Sunday, December 07, 2008 1:07 PM
Subject: RE: [LOGic] Select Criteria for awards?


Mel,
Not sure if I even know how to index the user defined field I created. I
went through the help and the videos to see if I could figure it out but
no luck...I haven't asked Dennis yet, thought it might be something
simple that someone here would recognize immediately... Thanks for the
suggestion..
73
Tim
NZ8J

-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net] On Behalf Of Mel Martin
Sent: Sunday, December 07, 2008 10:13 AM
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: Re: [LOGic] Select Criteria for awards?


I'm just guessing Tim... but could it be that awards report selects on
indexed fields only?

NZ8J wrote:
> Hi,
> I created a user defined field called Rig Here with a list of rigs to
> pick from.  I can go to the filter and pick the rig here field and for

> example select "K3" as the rig and it will show 34 records. When I go
to
> awards, select STATES and then as a select criteria select rig here =
K3
> and go on to finish the award report for STATES it still shows all
> states and not just the ones where RIG HERE = K3. The same holds true
> for DXCC.  Any ideas why it will show up when filtering the log, but
not
> when using the select criteria? I also tried setting up a sub award to

> track DXCC or Was just using a K3 as the rig and it still didn't work.
>
> Any help would be appreciated
> Thanks
> Tim
> Nz8J
> No virus found in this outgoing message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.176 / Virus Database: 270.9.15/1833 - Release Date:
> 12/6/2008 4:55 PM
>
>
> ----------------------------------------------------------------------
> --
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net http://mailman.qth.net/mailman/listinfo/logic

-- 
Mel, VE2DC
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net http://mailman.qth.net/mailman/listinfo/logic
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.9.15/1834 - Release Date:
12/6/2008 4:55 PM

No virus found in this outgoing message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.9.15/1834 - Release Date:
12/6/2008 4:55 PM


_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic