[LOGic] multiple QSL cards/reports

[Richard W. Harris]

Bill,
Thanks.  I have modified reports so I can print them individually. I was just trying to find a way to batch print the two operators on two different layouts.  We'll see if I can get it working.  Perhaps someone has a solution.
Richard - NI7F

From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net] On Behalf Of Bill W5WVO
Sent: Sunday, December 07, 2008 7:40 PM
To: logic at mailman.qth.net
Subject: Re: [LOGic] multiple QSL cards/reports

Richard,

I couldn't -- so I modified one of the stock reports (Octavia I think) to print one-off cards on 3.5" x 5.5" card stock using my printer's (optional) "card caddy" media tray. (HP OfficeJet 7210) Works... OK, sorta. The HP card caddy really doesn't feed reliably, and one must manually baby-sit it and angle the cards ... just SO ... to get it to feed. So not an ideal solution.

There is probably a programmatic solution for doing this on 4-plex stock as you desire, but unless one is a FoxPro guru, one will probably never figure it out without assistance. And I am certainly not one. :-)

Bill W5WVO
----- Original Message -----
From: Richard W. Harris<mailto:Richard_Harris at byu.edu>
To: logic at mailman.qth.net<mailto:logic at mailman.qth.net>
Sent: Sunday, December 07, 2008 10:58 AM
Subject: [LOGic] multiple QSL cards/reports

Hi,
I have two different QSL cards I need to print regularly.  One for my callsign and one for my club station.  I typically print one at a time using a custom report (#1) for my callsign and then I print the second custom report (#2).  I print onto card stock 4 QSLs at a time.

I am looking for a way to print both at the same time where LOGic could automatically print the QSLs for my callsign using report #1 and at the same time include the second callsign using report #2.  This would save a lot of time in the long run and greatly reduce wasting cardstock when I don't completely fill the cardstock with 4 QSLs.

I have found a way to automatically do this all using the operator command in the report but this does not meet my needs as I want to change the graphics I am printing using one graphic for one callsign and another graphic for the second callsign as well as changing other demographic information uniquie to each callsign.

Can anyone think of an easy way to print both reports at the same time using some kind of batch process or some other way?
Thanks much.
Richard - NI7F
________________________________
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/logic/attachments/20081207/a2461f08/attachment-0001.htm