[LOGic] 2 RIGS IN LOGIC

[Robie]

Dan,

In a nut shell, you must set up each rig with its own port using the setup 
menu.  You will see a seperate "rig" display for each rig in Logic. You can 
select the rig from which Logic will collect data on the Main log form.

If you have multiple ICOM rigs I believe it is possible to use only one port 
and simply specivy different addresses for each rig.

Robie - AJ4F

----- Original Message ----- 
From: "K0DAN" <k0dan at comcast.net>
To: <logic at mailman.qth.net>
Sent: Wednesday, November 28, 2007 12:55 PM
Subject: [LOGic] 2 RIGS IN LOGIC


>I just added another transceiver to the hamshack and now have two HF 
>stations on the air simultaneously. Can't find anything in the HELP index 
>for setting up two rigs with LOGIC.
>
> What options do I have in order to connect both to LOGIC?
>
> It'd be preferable to have both rigs simultaneously interfaced with LOGIC, 
> but I could live with fast switching between the two rigs (but prefer not 
> to have to swap cables and change setup menu each time).
>
> Has this topic been sent to the archives?
>
> Tnx es 73
> Dan
> K0DAN
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic