[LOGic] Callsign lookup problem

[J. Wolf]

   Problem solved. I had been trying to do the lookups before installing the 
latest update. Once that was done, the problem disappeared. Bottom line: the 
problem occurred with an early version of LOGic8 but has been resolved by 
updates.
73,
JW, K6JW

----- Original Message ----- 
From: "J. Wolf" <k6jw at scdxc.org>
To: <logic at mailman.qth.net>
Sent: Thursday, June 21, 2007 22:22
Subject: [LOGic] Callsign lookup problem


>   This week, I had to reinstall the operating system in my computer. After 
> reinstalling LOGic. everything seems to work OK except the callsign lookup 
> function. When it goes out to QRZ.com, the callsign appears and then the 
> entire program crashes in a hard freeze. I have QRZ.com as the second tier 
> lookup after the LOGic callsign database. Anyone else have this problem???
> --Jeff, K6JW
>
> ----- Original Message ----- 
> From: "J. Wolf" <k6jw at scdxc.org>
> To: <logic at mailman.qth.net>
> Sent: Saturday, June 09, 2007 13:13
> Subject: Re: [LOGic] Map and Spots
>
>
>> Vin:
>>   I'm not sure this will solve the problem, but here are two things to 
>> check. Go to the Options tab on the spot log window. Then:
>> 1. Be sure the "Send all spots to map" box is checked.
>> 2. Look at the pre-filter box. Mine is defaulted so that only spots from 
>> North America will show. If yours is set the same way, you might want to 
>> remove the filter. In my case, I really only do want to see spots from 
>> NA, since they're the ones I'm most likely to be able to hear.
>> 73,
>> JW, K6JW
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
>>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>