[LOGic] COM3 problems

[Xavier & familia]

Thanks for reply,

COM3 is really USB port, but as I explained I have no modified the hardware.
I try to install version .62 with no success (it seems the set up 
program detects it's an older version and leaves the newer one.
Since then Logic is running some couple of hours and COM3 is still 
running... I cross my fingers while touching wood....

73 de Xavier, EA3BHK

En/na Len N9IJ ha escrit:
> Xavier & familia wrote:
>> Hi
>>
>> I have my TNC connected to COM3 for RTTY operation. Since last update 
>> 8.0.65 or .66 I have problems with this comm-port
>>
>> Now I see that after a couple of time, suddenly the TNC port hangs 
>> and if I try to transmit something, it uses to show an error message 
>> saying ' COM 3 already in use'
>>
>> Has anybody experience with this trouble?
>>
>> Of course, I have neither running another soft that may conflict with 
>> logic nor hardware modification at all.
>>
>> 73 de Xavier, EA3BHK
>>
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
>>
>>
> Have you, by chance, installed a USB device such as printer, mouse, 
> etc? Some of these will claim a COM port through the USB interface. I 
> tend to forget AGWPE is running and that application uses a COM port 
> as well.
>