[LOGic] QSL LABEL REPORT

[k0dan]

Does anyone have the label report named "QSL LABELS WITH ADDRESS, 3 ACROSS"
working?

I'm using Logic 7 on Windows XP, and prinitng to a Lexmark Optra-EP laser
printer, to standard 1"x2-5/8" labels. I have tested on other printers (HP
laserjet 4, HP Deskjet 970) with same problem, ie it is not printer
specific. I have had this problem froever, and am just frustrated dealing
with it.

The problems with this label:

- left margin and upper border (header?) mis-calibrated, causing partial
loss of first character on left, and slight error on label vertical
alignment (which gets worse as printing approaches bottom of page

- The spacing between labels creates "label creep" such that each subsequent
label on the page is printed slightly lower than the preceding label. By the
bottom of the page, labels are totally unusable because an entire line (or
more) has been printed outside the confines of the label.

I shared the problem with Dennis, who gave me some tips for modifying the
report, but fixing one problem has created others and I'm no better off.

The date of the report I'm using is 1/28/03; I went to the FTP site and
found the report under LOGIC6, but don't know dates of origin.

Any help would be greatly appreciated. Would consider a reliable alternate
report which does QSL info and address labels in one pass!

Thanks and 73

Dan
K0DAN