[LOGic] Bug?

[Bill K1UQ]

What are others finding?

Here's what I've observed this AM w/ a bit more testing:

Tabbing works OK in the log form until QRZ populates the log form with data.

Once populated, the tabbing action switches to and remains in QRZ and you
are no longer tabbing in the log form.

And I found the length of time it takes for QRZ to open, find, and fully
display the call sign window is proportional to how long you can continue
tabbing in LOGic. If QRZ quickly finds the record you almost immediately
lose tab focus in LOGic log form. But if QRZ takes a moment to display the
call sign, during this delay tabbing continues to work in LOGic lending the
appearance that tabbing remains in LOGic.

For a number of reasons I should think tabbing ought to remain in the log
form. Not sure this should be called a bug, but rather just not programmed
the way some might like.

What do you think?

Regards, Bill K1UQ

-----Original Message-----
From: knut [mailto:knut at cytanet.com.cy] 
Sent: Monday, March 13, 2006 1:25 AM
To: Bill K1UQ; 'Greg Hodsdon'; ve2dc at rac.ca; 'PDA'
Cc: logic at mailman.qth.net
Subject: Re: [LOGic] Bug?

Hi All!

After QRZ has populated the log form, just
minimize QRZ and the tabbing in the logform
works OK.



73 de 5B4AFH/Knut

Knut Gudbrandsen.  Phone: +357 23 721 056
P O box 30175
CY-5341 AYIA NAPA
Cyprus


All outgoing mail scanned with Norton.
----- Original Message ----- 
From: "Bill K1UQ" <k1uq at comcast.net>
To: "'Greg Hodsdon'" <k7kj at arrl.net>; <ve2dc at rac.ca>; "'PDA'" 
<pdainc at hosenose.com>
Cc: <logic at mailman.qth.net>
Sent: 13 March, 2006 1:06
Subject: RE: [LOGic] Bug?


> Hi Greg - thanks for jumping in on this one.
>
> Not sure I understand your reply. If I enter 4L1AN it does as initially
> reported - it activates QRZ, and it does populate the log form with all
> correct info:  DXCC, ITU, CQ, etc. The problem I see as does the initial
> reporter of this issue is that once you enter the call sign into log form
> and hit tab key, QRZ opens, and then if you continue hitting tab key you 
> are
> NOT tabbing from LOGic field to LOGic field, instead you remain focused
> within QRZ and your tab key presses move you within QRZ - not in the log
> form.
>
> So are you suggesting this action is controlled by the prefix list? Hmmm, 
> I
> wonder how? Exactly what are you suggesting?
>
> Regards, Bill
>
> -----Original Message-----
> From: Greg Hodsdon [mailto:k7kj at arrl.net]
> Sent: Sunday, March 12, 2006 4:26 PM
> To: 'Bill K1UQ'; ve2dc at rac.ca; 'PDA'
> Cc: logic at mailman.qth.net
> Subject: RE: [LOGic] Bug?
>
> LOGic8 here behaves as it should by staying in the log window and 
> providing
> the info on both 4L and HQ.  Sounds like you may be using an outdated DXCC
> prefix list from an earlier version of LOGic. Check the entries in your
> prefix list.
> 73 de Greg, K7KJ
> Portland, OR
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Bill K1UQ
> Sent: Sunday, March 12, 2006 7:32 AM
> To: ve2dc at rac.ca; 'PDA'
> Cc: logic at mailman.qth.net
> Subject: RE: [LOGic] Bug?
>
> Looks like it might be.
>
> I tried w/ 4L1AN, HQ9F, HQ9A and it does as you say. Once QRZ is 
> activated,
> it does have the focus and tabbing no longer moves you through LOGic8 Log
> fields, but rather through QRZ fields.
>
> I then tried using my call and it did not replicate behavior using 4L1AN
> call.
>
> I tried using calls previously worked and in my log as well as new calls 
> not
> in my log. Same type behavior.
>
> I repeated the above using LOGic7 - same behavior, except the call book
> order was different than setup on LOGic8, so I do not believe call book
> selection order comes into play.
>
> You should email PDA.
>
> Regards, Bill K1UQ
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of mel martin
> Sent: Sunday, March 12, 2006 9:42 AM
> To: 'PDA'
> Cc: logic at mailman.qth.net
> Subject: [LOGic] Bug?
>
>
>
> When I log a callsign such as 4L1AN which in my case is only found on
> QRZ.com... The focus shifts to the Calbook window instead of staying on 
> the
> log window.
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 2006-03-10
>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>