[LOGic] Bug?

[knut]

Hi All!

After QRZ has populated the log form, just
minimize QRZ and the tabbing in the logform
works OK.



73 de 5B4AFH/Knut

Knut Gudbrandsen.  Phone: +357 23 721 056
P O box 30175
CY-5341 AYIA NAPA
Cyprus


All outgoing mail scanned with Norton.
----- Original Message ----- 
From: "Bill K1UQ" <k1uq at comcast.net>
To: "'Greg Hodsdon'" <k7kj at arrl.net>; <ve2dc at rac.ca>; "'PDA'" 
<pdainc at hosenose.com>
Cc: <logic at mailman.qth.net>
Sent: 13 March, 2006 1:06
Subject: RE: [LOGic] Bug?


> Hi Greg - thanks for jumping in on this one.
>
> Not sure I understand your reply. If I enter 4L1AN it does as initially
> reported - it activates QRZ, and it does populate the log form with all
> correct info:  DXCC, ITU, CQ, etc. The problem I see as does the initial
> reporter of this issue is that once you enter the call sign into log form
> and hit tab key, QRZ opens, and then if you continue hitting tab key you 
> are
> NOT tabbing from LOGic field to LOGic field, instead you remain focused
> within QRZ and your tab key presses move you within QRZ - not in the log
> form.
>
> So are you suggesting this action is controlled by the prefix list? Hmmm, 
> I
> wonder how? Exactly what are you suggesting?
>
> Regards, Bill
>
> -----Original Message-----
> From: Greg Hodsdon [mailto:k7kj at arrl.net]
> Sent: Sunday, March 12, 2006 4:26 PM
> To: 'Bill K1UQ'; ve2dc at rac.ca; 'PDA'
> Cc: logic at mailman.qth.net
> Subject: RE: [LOGic] Bug?
>
> LOGic8 here behaves as it should by staying in the log window and 
> providing
> the info on both 4L and HQ.  Sounds like you may be using an outdated DXCC
> prefix list from an earlier version of LOGic. Check the entries in your
> prefix list.
> 73 de Greg, K7KJ
> Portland, OR
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Bill K1UQ
> Sent: Sunday, March 12, 2006 7:32 AM
> To: ve2dc at rac.ca; 'PDA'
> Cc: logic at mailman.qth.net
> Subject: RE: [LOGic] Bug?
>
> Looks like it might be.
>
> I tried w/ 4L1AN, HQ9F, HQ9A and it does as you say. Once QRZ is 
> activated,
> it does have the focus and tabbing no longer moves you through LOGic8 Log
> fields, but rather through QRZ fields.
>
> I then tried using my call and it did not replicate behavior using 4L1AN
> call.
>
> I tried using calls previously worked and in my log as well as new calls 
> not
> in my log. Same type behavior.
>
> I repeated the above using LOGic7 - same behavior, except the call book
> order was different than setup on LOGic8, so I do not believe call book
> selection order comes into play.
>
> You should email PDA.
>
> Regards, Bill K1UQ
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of mel martin
> Sent: Sunday, March 12, 2006 9:42 AM
> To: 'PDA'
> Cc: logic at mailman.qth.net
> Subject: [LOGic] Bug?
>
>
>
> When I log a callsign such as 4L1AN which in my case is only found on
> QRZ.com... The focus shifts to the Calbook window instead of staying on 
> the
> log window.
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 2006-03-10
>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>