[LOGic] LOG Enhancement - is this useful?

[Bill K1UQ]

Yes, but please do not confuse this with the enhancement in my proposal.
This is the manual operation as I explained. I wish this to be automated in
two different optional methods and remove these manual steps.

Regards, Bill K1UQ

-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Rich Kelly
Sent: Sunday, March 12, 2006 1:19 PM
To: 'Mac McDaniel'
Cc: logic at mailman.qth.net
Subject: RE: [LOGic] LOG Enhancement - is this useful?

That did work!

I never knew that.....I am posting this response to the reflector. Thanks!

Rich Kelly
Kelly Creation Computers
Prairie du Chien, WI
Office 608-326-7800
Mobile 608-732-5359
http://www.stoit.net 

-----Original Message-----
From: Mac McDaniel [mailto:n0ob at nntc.net] 
Sent: Sunday, March 12, 2006 12:06 PM
To: Rich Kelly
Subject: Re: [LOGic] LOG Enhancement - is this useful?

Hi Rich,

If I am understanding correctly what you mean.  I believe it can already be 
done.
Just put the call sign in the via and click LOG, then CALLBOOK TO ADDRESS.
That will put the via call signs address in the address box instead of the 
station
worked.

Hope this is what you were looking for.
73, Mac  N0OB


----- Original Message ----- 
From: "Rich Kelly" <richpdc at centurytel.net>
To: "'Bill K1UQ'" <k1uq at comcast.net>; <logic at mailman.qth.net>
Cc: <dh at hosenose.com>
Sent: Sunday, March 12, 2006 10:38 AM
Subject: RE: [LOGic] LOG Enhancement - is this useful?


>I would like this enhancement too!
>
> It would be nice to have the "qsl via" call looked up and sent to the
> address area. I have to do an extra step or two now the way it is to get 
> the
> correct address (via manager) in there for qsling and not print a label 
> that
> I don't need for the direct route.
>
> Rich Kelly
> KB9RNO
>
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Bill K1UQ
> Sent: Sunday, March 12, 2006 10:01 AM
> To: logic at mailman.qth.net
> Subject: [LOGic] LOG Enhancement - is this useful?
>
> What do you think of this change which would be OPTIONAL, meaning use it 
> if
> you desire and if you have no interest it would be completely transparent 
> to
> you as a user:
>
>
> CURRENT LOGic8 METHODS - -
>
> Automatic Entry -
> 1. A user can invoke automatic entry of worked station's address into your
> log. Using this features allows LOGic to fetch address from a call book 
> and
> enter into the address field.
>
> Manual Entry -
> 1. User does not have automatic address entry option selected in setup.
> 2. User may now manually select "Callbook to address" which fetches 
> address
> from call books only for the opened log record and only when the user
> manually takes this action.
> 3. If the user has entered a different call sign, such as a QSL Manager 
> call
> sign, home call sign, etc, then this is the address fetched and entered 
> into
> the log form address field.
>
>
>
> PROPOSED ENHANCEMENT - -
> Reminder - these are additional options, user selectable, LOGic8 retains
> same options/actions as above.
>
> ADD THESE ADDITIONAL FEATURES:
> 1. Allow an additional selection in setup that enables automatic entry of
> ONLY address for the call sign entered into the "QSL Via" logform field.
> This option excludes entry of the worked station address, and only enters
> address of the QSL Via address.
> 2. Allow an additional selection in setup that enables automatic entry of
> BOTH address for the worked station AND the call sign entered into the 
> "QSL
> Via" logform field. QSL Via address would be entered into the address
> logform field as this is the address you want to extract for QSLing use. 
> The
> worked station address is entered into the Notes logform field, as this is
> now historical info not intended for QSLing. This address merely needs to 
> be
> retained as a notaion if user has selected this option.
>
> VALUE ADDED - -
> The user may now log addresses in the following five methods:
> 1. Automatic, worked station address only. <existing>
> 2. Manual, worked station address only. <existing>
> 3. Manual, QSL Via address only. <existing>
> 4. Automatic, QSL Via address only. <PROPOSED>
> 5. Automatic, worked station address and QSL Via address. <PROPOSED>
>
> If you support this idea, please let PDA know.
>
> Regards, Bill K1UQ
>
>
>
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of mel martin
> Sent: Sunday, March 12, 2006 9:42 AM
> To: 'PDA'
> Cc: logic at mailman.qth.net
> Subject: [LOGic] Bug?
>
>
>
> When I log a callsign such as 4L1AN which in my case is only found on
> QRZ.com... The focus shifts to the Calbook window instead of staying on 
> the
> log window.
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 2006-03-10
>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 3/10/2006
>
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 3/10/2006
>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
> 



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 3/10/2006
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 3/10/2006
 

_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic