[LOGic] LOTW Problem LOGic 8

[Carl J. Denbow]

Well, this is truly strange. I got it to work, and it was a password case=
 problem.  Thanks for focusing me on that issue, Mel.  What I don't=
 understand is that my password was all lower case, and that's what worked=
 yesterday when, as a test, I successfully loaded my new certificate in=
 Trusted QSL.  However, just now when I tried to upload QSOs to the LOTW in=
 LOGic8, I thought what the heck, I'll put the caps lock on, and viola -- it=
 worked.  Now, why would my new certificate on my HD have an all LC password=
 but going through LOGic it would have an all UC password.  In truth, I=
 don't suspect that this is a problem with LOGic, but with some weirdness at=
 the ARRL LOTW site, which LOGic communicates with.  I just tested that I=
 can log on to the LOTW site manually using this same password in LC.  I=
 always do my passwords in LC.  Now, the LOTW site probably is technically a=
 different password (though I used the same one), so that's not really the=
 issue.  The real issue is why the cert loads on my computer with an LC=
 password but requires an UC password through LOGic.  Are we in the Twilight=
 Zone yet? :-)

73,

Carl
N8VZ

-- 
Carl J. Denbow, n8vz at qth.com on 3/5/2006


On Sun, 5 Mar 2006 18:00:18 -0500, Carl J. Denbow wrote:
> No, I checked the caps lock business.  That's not the problem.  Any
> other suggestions?
>
> 73,
>
> Carl
> N8VZ
> --
> Carl J. Denbow, n8vz at qth.com on 3/5/2006
>
>
> On Sun, 05 Mar 2006 06:03:35 -0500, mel martin wrote:
>> Only thing I can think of is be sure the case is correct...
>> Passwords are case sensitive.
>>
>> Can't try it here... My Logic 8 CD was mis-addressed and lost in
>> space. Waiting for a replacement...
>>
>>> -----Original Message-----
>>> From: logic-bounces at mailman.qth.net
>>> [mailto:logic-bounces at mailman.qth.net] On Behalf Of Carl J.
>>> Denbow Sent: March 5, 2006 00:43 To: logic Cc:
>>> pdainc at hosenose.com Subject: [LOGic] LOTW Problem LOGic 8
>>>
>>>
>>> For some reason I can't upload QSOs to the LOTW with LOGic 8.
>>> It was working fine with LOGic 7.  I have newly renewed certs
>>> installed on my computer.  However, at the end of the upload
>>> steps in LOGic it asks for location, and I put in Home QTH,
>>> then it asks for the password I used when I created the certs.
>>> I put in the password and it says password error. But, when I
>>> use the Trusted QSL program itself and load the certs, it
>>> accepts the
>>> same password.  Anyone else have this problem?  Though LOTW is
>>> a confusing mess to begin with, I did have it all figured out
>>> and it was working smoothly in the previous version of LOGic.
>>> Help would be appreciated.
>>>
>>> 73,
>>>
>>> Carl
>>> N8VZ
>>>
>>> --
>>> Carl J. Denbow, n8vz at qth.com on 3/5/2006
>>>
>>> _______________________________________________
>>> LOGic mailing list
>>> LOGic at mailman.qth.net
>>> http://mailman.qth.net/mailman/listinfo/logic
>>>
>>> --
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date:
>>> 2006-03-03
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic