[LOGic] Setting clock not available

[Xavier & familia]

Thanks for replies.
 
I'm running Windowx XP without his built-in firewall enabled. I have Kerio
firewall running and every time I upgrade Logic, Kerio prompts about the exe
program has been modified and asking me about to permit or no the internet
conection.
 
I uninstall Kerio software and reinit the computer, the problems persist and
after reinstalled Kerio with no rules for the firewall, when I starts Logic,
Kerio prompts me for the Telnet conection (port 8800) and nothing at all
about the set clock port (port 13).
 
More test: I have also Logic v6 and with this version the set clock feature
works fine (Kerio prompts me for telnet and set clock connections).
 
Ending.. why to have external software if Logic has in it? 
 
I will ask Dennis for this problem, hanks for your attention
 
Xavier, EA3BHK
 
-------Mensaje original------- 
 
De: Mel Martin 
Fecha: 02/17/06 22:04:30 
Para: Xavier & familia 
CC: logic at mailman.qth.net 
Asunto: Re: [LOGic] Setting clock not available 
 
If you are running a firewall, you may have to re-enable Internet access 
for Logic because the binary has changed. 
 
Xavier & familia wrote: 
> Hi 
> 
> since Logic7 v160 when I try to set my computer clock using the feature
from 
> Logic, an error occurs: 
> 
> "You are not connected to the internet. Cannot set the clock" 
> 
> At the same time I have an opened telnet sesion and even I can download
IOTA 
> list, thus my interenet connection runs 100%, any comments out there? 
> 
> I've installed last upgrade from ftp (v163) with no success 
> 
> Thanks in advance 
> 
> Xavier, EA3BHK 
> 
> _______________________________________________ 
> LOGic mailing list 
> LOGic at mailman.qth.net 
> http://mailman.qth.net/mailman/listinfo/logic 
> 
> 
 
_______________________________________________ 
LOGic mailing list 
LOGic at mailman.qth.net 
http://mailman.qth.net/mailman/listinfo/logic