[LOGic] QSL Dates

[K0DAN]

Gawrsh! Usually I am clueless at to the machinations of LOGIC and am the one 
asking for help & advice. Glad it worked and happy to return some help to 
the LOGIC pool.

73

Dan
K0DAN

----- Original Message ----- 
From: "Brian Smithson" <n8wrl at att.net>
To: "'K0DAN'" <k0dan at comcast.net>; <n8wrl at arrl.net>; <logic at mailman.qth.net>
Sent: Sunday, December 03, 2006 7:36 PM
Subject: RE: [LOGic] QSL Dates


> Ahh, that's it. Didn't notice the 'C' or 'R' at the top. Sure enough,
> clicking 'C' sets QSL to 'F' and sets QSLRDate.
>
> Thanks!
>
> -Brian n8wrl
>
> -----Original Message-----
> From: K0DAN [mailto:k0dan at comcast.net]
> Sent: Sunday, December 03, 2006 6:54 PM
> To: n8wrl at arrl.net; logic at mailman.qth.net
> Subject: Re: [LOGic] QSL Dates
>
> Assuming you're running Logic 8, you should have two choices:
>
> a) QSL-R box should have a drop-down menu (with 4 choices), or
> b) Top line of LOG window should have "C" (check-in) and "R" (request) 
> boxes
> for QSL action; the "C" box should log receipt of the incoming QSL
>
> Thos will "automagically" place the data in the fields, or you may 
> manually
> fill in the fields.
>
> GL es 73
> Dan
> K0DAN
>
> ----- Original Message -----
> From: "Brian Smithson" <n8wrl at att.net>
> To: <logic at mailman.qth.net>
> Sent: Sunday, December 03, 2006 4:16 PM
> Subject: [LOGic] QSL Dates
>
>
>> Someone else's note prompted me to add QSLRDATE and QSLSDATE to my log
>> form.
>> I just received a QSL today and went to the log form to record it. I
>> flagged
>> the QSL as 'F' but the QSLRDATE is still blank. Is there an automagical
>> way
>> to set this up so these dates get set?
>>
>> 73!
>>
>> -Brian n8wrl
>> _______________________________________________
>> LOGic mailing list
>> LOGic at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/logic
>>
>
>