[Logic] Logic 7 QSL Labels

[Randy Shake]

Thanks Bob.  That is my same problem.  Prints half the QSO on one label and 
half on the next label.  A real pain trying to cut each label in half.  I'll 
try the page height adjustment tonight.

73's Randy, KC9LC

----- Original Message ----- 
From: "Robert Carroll" <rlcarroll at patmedia.net>
To: "'Randy Shake'" <rshake at verizon.net>; "'LOGic is open to all radio 
amateurs for discussion of LOGic logging program.'" <logic at mailman.qth.net>
Sent: Monday, March 07, 2005 9:21 PM
Subject: RE: [Logic] Logic 7 QSL Labels


> Randy-
>
> I found the same thing and fixed it by adjusting the "height" of the page
> header a little--experimentally.  I did not change anything in the label
> because in my case the vertical misalignment on each label down the page 
> was
> the same--indicating the label was the correct width but the offset was
> wrong.  Save your new report under another name--in case of foulup.  I 
> think
> you have to save it twice--once when exiting.
>
> Bob W2WG
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of Randy Shake
> Sent: Monday, March 07, 2005 7:29 PM
> To: LOGic is open to all radio amateurs for discussion of LOGic logging
> program.
> Subject: Re: [Logic] Logic 7 QSL Labels
>
> More questions on printing labels.
>
> 1. I just printed the QSO data on "3 label across with mult QSO's" and it
> started printing too high on the Avery 8160 sheet, so that printing each
> label overlapped all the way down the sheet.  How can this "centering" be
> corrected?
>
> 2.  After printing the labels above, I tried to print address labels with
> the print criteria set to QSL sent = R.  It would not print any labels 
> with
> a message something like the file is empty or nothing to print.  I did 
> look
> again at the log and all the QSO's do have an "R" status.
>
> Any help would be greatly appreciated.
>
> Thanks & 73's
>
> Randy, KC9LC
> ----- Original Message ----- 
> From: "Arthur Tan" <ab4rl at amsat.org>
> To: "LOGic is open to all radio amateurs for discussion of LOGic logging
> program." <logic at mailman.qth.net>
> Sent: Tuesday, March 01, 2005 9:36 PM
> Subject: Re: [Logic] Logic 7 QSL Labels
>
>
>>From WA2QNW at aol.com on Tuesday, March 1, 2005, 4:33:23 PM:
>
>> staying for version 6 for now....
>
>> i am reading this thread will your comments apply to my ver 6 as
>> well??
>
>> chuck
>
> Hi Chuck,
>
> Most of the qsl label reports from LOGic 7 are backwards compatible with
> LOGic 6
> (and vice versa).
>
> 73, Art AB4RL/6
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
>