[Logic] Logic 7 QSL Labels

[Randy Shake]

More questions on printing labels.

1. I just printed the QSO data on "3 label across with mult QSO's" and it 
started printing too high on the Avery 8160 sheet, so that printing each 
label overlapped all the way down the sheet.  How can this "centering" be 
corrected?

2.  After printing the labels above, I tried to print address labels with 
the print criteria set to QSL sent = R.  It would not print any labels with 
a message something like the file is empty or nothing to print.  I did look 
again at the log and all the QSO's do have an "R" status.

Any help would be greatly appreciated.

Thanks & 73's

Randy, KC9LC
----- Original Message ----- 
From: "Arthur Tan" <ab4rl at amsat.org>
To: "LOGic is open to all radio amateurs for discussion of LOGic logging 
program." <logic at mailman.qth.net>
Sent: Tuesday, March 01, 2005 9:36 PM
Subject: Re: [Logic] Logic 7 QSL Labels


>From WA2QNW at aol.com on Tuesday, March 1, 2005, 4:33:23 PM:

> staying for version 6 for now....

> i am reading this thread will your comments apply to my ver 6 as
> well??

> chuck

Hi Chuck,

Most of the qsl label reports from LOGic 7 are backwards compatible with 
LOGic 6
(and vice versa).

73, Art AB4RL/6

_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic