[Logic] LOGic 7 / Hamscope & PTT

Sat, 13 Mar 2004 14:24:58 -0500

Hi Mel,

Here is the text version for the benefit of others on the reflector.

In Hamscope (I'm running v1.54) General Setup:

PTT Control Setup

COM Port - COM 1 (port for my RIGblaster, yours would be whatever port
you've assigned for your particular interface)
PTT Using - Both (yours may be RTS or DTR, whatever you setup for the
interface)
PTT to Logger - Check this if LOGic is the controller
Hard Key CW Using - Mine is set to none for now, don't do much CW but that
will change very soon
Unused Pins High - Mine is checked

Rig Control Setup

COM Port - Port your rig is assigned to, mine is COM 4
Radio - LOGic 6
Rig Baud - 9600

Log Program is set to LOGic 6

That's really all there is.  Knowing you (your not a novice) you probably
tried to set Hamscope to work with your rig (Icoms I think) as a standalone
application (i.e., not linked to LOGic).  I did it first and the only
parameters above that changed were "PTT to Logger", which was set to "PTT to
Rig Control" and "Radio" was set to Icom 756ProII (my rig).  Of course the
Log Program was set to none.

I'll send you the screen shots in a couple minutes.

Hope this helps,

Brad

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Mel
Sent: Saturday, 13 March, 2004 1:59 PM
To: [email protected]
Subject: RE: [Logic] LOGic 7 / Hamscope & PTT

Please share your settings in Hamscope... Can you send me a screen shot of
General Setup? (alt-print-screen)

Send to [email protected]

PTT works fine from Logic 7, but I can't get PTT to work from Hamscope...
(everything else is fine)

I had it working with Logic 6...

> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Brad - N8GLS
> Sent: March 13, 2004 13:06
> To: LOGic Reflector
> Subject: [Logic] LOGic 7 / Hamscope & PTT
>
>
> For Mel & others using Hamscope with LOGic 7
>
> PTT works fine from Hamscope, both stand-alone and linked to
> LOGic 7.  I'm using a RIGblaster plus and it keys it just fine.
>
> While fooling around in LOGic I did manage to get some errors
> while messing with the ports and setting up the CW and
> Voice/PTT.  Haven't figured out just what is going on with
> that yet but suffice to say for now that Hamscope works.
>
> After I make sure its not operator error (that could never
> be, hi hi) I'll report any other problems.
>
>
> 73 de N8GLS, Brad
>
>
> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
>

_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic