[Logic] Logic 7

[Julio Peralta]

Terry mine set up during the installation of V7. I didn't have to do
anything.

Julio, W4HY


----- Original Message ----- 
From: "Terry Dummler" <wq7a@arrl.net>
To: "Logic Mail List" <logic@mailman.qth.net>
Sent: Thursday, January 15, 2004 7:19 PM
Subject: [Logic] Logic 7


> Hello all
>
> I am in the final stages of making Logic 7 the primary logging
> version.   Version 6 is still there just in case.  I have copied over
> the log, forms and reports and all went well.
>
> There are a few things that don't transfer well and had to be handled
> manually.   I have six User Defined fields that had to be entered
> manally in thier proper place.  Since I do a lot of mobile contacts I
> have a whole second set of highly modified county names that had to be
> exported from Logic 6 Lists of Valid values, but that export/import
> worked well also.
>
> Alas, I am sad to see that the rig interface with the Yaesu FT-1000MP
> still will not read the active communicating frequency.  It insists on
> reading the last active VFO frequency and not a memory frequency, if
> that is the one in use.  Very distracting and prone to logging errors
> when trying to use the memory channels.
>
> Now on to bigger and better adventures in L7.  Lots of new features to
> play with. Next will be setting the Callbook lookup.  According to the
> video included on the disk it will be a whizbang feature!
>
> Good luck.
>
> Terry, WQ7A
>
> _______________________________________________
> LOGic mailing list
> LOGic@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>