[Logic] LOGic7 - Icom enhancements, prefix & lists

Tue, 13 Jan 2004 13:51:46 -0500

It's easy, and is available in other loggers... take a look at the DXLab
series of programs...
All you have to do is define which bands each radio covers. It would be very
useful for me... and another for 2M & 440.

----- Original Message ----- 
From: "Self" <[email protected]>
To: "Bradford J. Williams - N8GLS" <[email protected]>
Sent: Tuesday, January 13, 2004 10:14
Subject: RE: [Logic] LOGic7 - Icom enhancements, prefix & lists

> Hi--
>
> LOGic 7 doesn't select a rig based on frequency.  I don't see how
> you could select a rig based on frequency, since the rigs are the
> sorce of the frequencies to begin with.  A rig is still tied to a log
> form.  I suppose we could select the rig based on the last rig to
> have the VFO or mode changed using the front panel.  Something
> to think about I suppose.
>
> For exceptions in the prefix table, you may simply enter the call in
> with the list of prefixes--no change here--it's been that way since at
> least LOGic 5.
>
> The Lists of Valid Values, besides having a new navigation feature,
> has changed significantly in that it is no longer used to keep
> membership lists such as 1010, etc.  They have been moved to a
> new Memberships facility, and auto logging of 1010 number, etc is
> done from that new facility.  Tracking of awards progress for 1010
> etc is still in the lists table--in other words, LOGic will generate an
> automatic entry here for each 1010 WORKED.
>
> If any questions or comments pse contact me directly.
>
> Tnx & 73,
>
> Dennis WN4AZY
> From:           "Bradford J. Williams - N8GLS" <[email protected]>
> To:             <[email protected]>
> Subject:        RE: [Logic] LOGic7 - Icom enhancements
> Send reply to:  [email protected]
> Date sent:      Sun, 11 Jan 2004 09:04:32 -0500
>
> > Hi Mel,
> >
> > Sounds very nice to have the Icom polling issue worked out.  I'm
> > especially impressed with the automatic rig selection depending on
> > frequency feature, can't wait to get it ordered on Monday (I wasn't
> > aware until yesterday that LOGic 7 was out, would have ordered it
> > Friday if I had looked on the website, drats !!).  After looking at
> > the preview info on the PDA website it sure looks like 7 offers many
> > many improvements.
> >
> > Are there any fundamental differences in how the List of Valid Values
> > and Prefix Table work ??
> >
> > Thanks,
> >
> > Brad, N8GLS
> >
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]]On Behalf Of Mel Sent: Sunday, 11
> > January, 2004 8:36 AM To: [email protected] Cc: [email protected]
> > Subject: RE: [Logic] LOGic7 - Icom enhancements
> >
> >
> > And I forgot to mention... Icom control works much better... Split is
> > set correctly now (it never worked in ver 6 ) and polling is
> > supported... Which is more important than indicated in the news
> > release... It not only allows you to use multiple rigs on the same
> > port, it also opens the door to such refinements as S-meter display,
> > automatic rig selection depending on frequency and other enhancements.
> > It also allows Icom users to configure their rig to match their
> > contesting software. Writelog, for example, uses polling ONLY... And
> > some older Icoms are very awkward to change from polling to
> > non-polling mode... Involving opening up the radio and setting DIP
> > switches or worse... Soldering/unsoldering diodes.
> >
> > A caveat for Icom users out there... Don't poll a rig configured in
> > CI-V transceive mode... Even if it seems to work. Experience has shown
> > that unexpected things can happen with data collisions including
> > freezing the CI-V interface, Freezing the radio completely, mis-read
> > frequencies (dangerous if you have a computer controlled amp or
> > antenna switch) and other hiccups...
> >
> > Note to Dennis: You might want to mention this in the help file...
> >
> > > -----Original Message-----
> > > From: [email protected]
> > > [mailto:[email protected]] On Behalf Of Mel
> > > Sent: January 10, 2004 23:03
> > > To: [email protected]
> > > Subject: RE: [Logic] LOGic7
> > >
> > >
> > > Still have the beta here.... And about 80% of the things I
> > > asked for are in it. The alert feature for spotting is
> > > especially good, as is the ability to get CW alerts through
> > > the sound card. The LotW support works great. Still a few too
> > > many steps to upload, but it's easy... Eventually it would be
> > > nice if Logic could generate the signed file. Download is a
> > > breeze. The ability to undo a spot is great! Great to check a
> > > frequency, then get back to where you were. Lots of other new
> > > features and improvements.... But the LotW support and
> > > Spotting improvements really make the upgrade worthwhile.
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: [email protected]
> > > > [mailto:[email protected]] On Behalf Of Bill VanAlstyne
> > > > Sent: January 10, 2004 20:10 To: [email protected] Subject:
> > > > Re: [Logic] LOGic7
> > > >
> > > >
> > > > Julio's post was the first I had heard of the release of
> > > > LOGic 7, so I went to the website to check it out. All I can
> > > > say is, A-W-E-S-O-M-E!!! The stuff Dennis has been working on
> > > > sounds really dead on. Looks like he's been listening to us. ;-)
> > > >
> > > > Anybody else have it yet? How do the new features seem to perform?
> > > >
> > > > Dennis, kudos and many thanks for all your hard work!
> > > >
> > > > Bill / W5WVO
> > > > ABQ, NM / DM65
> > > >
> > > >
> > > > Julio Peralta wrote:
> > > > > I just got the new version 7 of LOGic. Since it is a new program
> > > > > Dennis has you set it up in a new directory. Which means
> > > > that all the
> > > > > settings for everything have to be redone. Are there some
> > > > > configuration files that can be moved over from LOGic 6 that
> > > > > will avoid having to do that?
> > > > >
> > > > > Julio
> > > > >
> > > > > --- StripMime Report -- processed MIME parts ---
> > > > multipart/alternative
> > > > >   text/plain (text body -- kept)
> > > > >   text/html
> > > > > The reason this message is shown is because the post was
> > > in HTML or
> > > > > had an attachment.  Attachments are not allowed.  To learn how
> > > > > to post in Plain-Text go to: http://www.expita.com/nomime.html
> > > > > --- _______________________________________________ LOGic
> > > > > mailing list [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > > >
> > > >
> > > _______________________________________________
> > > > LOGic mailing list
> > > > [email protected]
> > > > http://mailman.qth.net/mailman/listinfo/logic
> > > >
> > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected] http://mailman.qth.net/mailman/listinfo/logic
> > >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
>
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic