Another question re: [Logic] field value replacement on multiple records

Sun, 15 Feb 2004 16:17:43 -0500

I think you just need to go through the uploading steps again. I think 
when you upload your entries will appear as dupes to LoTW and will not 
be recorded. You can then have LOGic mark your records as send.

Bob Mattaliano wrote:

>Thanks Andy,
>
>Prior to version 7, I uploaded many Q's to LOTW.  Does anyone know how
>to do a global replace to end up with the "checkmark" in the "LOTW s"
>field?
>
>TKS,
>
>Bob
>
>-----Original Message-----
>From: [email protected] [mailto:[email protected]]
>On Behalf Of Anthony Luscre K8ZT
>Sent: Sunday, February 15, 2004 15:18
>To: [email protected]
>Subject: Re: [Logic] field value replacement on multiple records
>
>1. Make a backup of your log (using backup resort function from Tools
>Menu)
>2. Select from Tools Menu...Advaced....Database Commands
>3. In smaller box inside Database Commands dialog box type: USE LOG
>4. press Enter key on keyboard
>5 From menu bar in Database Commands box choose Database Files...Mass 
>Change...Replace Field Contents
>6. Using the drop down menu in Replace Dialog box choose "operator"
>7. Enter your callsign in the "with" box.
>8. Use bottom "Replace only if" only when you only want to effect record
>
>in a certain range i.e. before a certain date, US contacts only, etc.
>9. Click OK
>10. To check to make sure replace  has taken effect go to a record that 
>had operator field originally blank
>
>Rich K. wrote:
>
>  
>
>>Hi all, 
>>I just starting using Logic7 and am really enjoying it, but I have a
>>question for the group on doing an entry replacement on the "operator"
>>field.
>>
>>I imported my logbook from another program and everything went fine
>>except for the operator field. It shows "NOCALL" on about 950 records
>>and I want it to be my call, KB9RNO, of course.
>>
>>I am sure that it can be done, but does anyone know where I go to do it
>>and what the commands will be??
>>
>>Thank you, in advance, for your replies.
>>
>>Rich Kelly -KB9RNO
>>
>>
>>
>>
>>--- StripMime Report -- processed MIME parts ---
>>multipart/alternative
>> text/plain (text body -- kept)
>> text/html
>>The reason this message is shown is because the post was in HTML
>>or had an attachment.  Attachments are not allowed.  To learn how
>>to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>>_______________________________________________
>>LOGic mailing list
>>[email protected]
>>http://mailman.qth.net/mailman/listinfo/logic
>>
>> 
>>
>>    
>>
>
>  
>

-- 
|--------------------------|
     Anthony A. Luscre    
            K8ZT      
        Stow, Ohio	  
|--------------------------|
    Visit My Website at
  http://www.qsl.net/k8zt
|--------------------------|