[Logic] Qsl card report fix.

[ANTHONY BOYKIN]

My pleasure Art,
                         I can't claim credit to this fix though. I first
notice the edit when I started using the reports
from LOGic 5. Either Dennis WN4NZY or some un known report editor had the
foresight to make that simple change, without realizing the time it saves
editing a log if you hit the wrong key. I don't know how many times I closed
out a report and not looked at the screen.

CUL/73

Tony/WB2JRI

----- Original Message -----
From: "Arthur Tan" <ab4rl@lomag.net>
To: "LOGic reflector" <logic@mailman.qth.net>
Sent: Wednesday, September 17, 2003 10:50 AM
Subject: Re: [Logic] Qsl card report fix.


> Hi Tony,
>
> Thanks, works like a charm!  I went in and chaned most of the reports
> I use.  You're right, it's much safer for the button to default to
> "No" as you can always go back and run the report again and hit "Yes"
> to mark changes.
>
> 73, Art AB4RL
>
>
>
> From ANTHONY BOYKIN <wb2jri@optonline.net> on Sep 16, 2003:
>
> > HI Art,
>
> > The edit is easy, but make shore it is not there be for you change
> > it.  Open a report {Usually a Qsl card/report} that when you run in
> > mufti mode ask you at the end of the report run if "Do you want to
> > mark QSLs as printed (QSL SENT = F) and record date printed?".
>
> > Older report when run will hi light the YES button when it better to
> > have the NO in case you rush and hit the wrong button and have to
> > edit your entire log for the mistake. QSL "F" when you didn't mean
> > to press YES. I look at it as a safety on the report because you can
> > always re-run the report and hit YES when you are ready.
>
> > THE FIX
>
> > 1. Edit a report that ask you Mark QSL "F" usually one of your Qsl
> > card will have it.
>
> > 2. CLICK > Command Scripts > After Run>
>
> > 3. Look for: if IDYES=MessageBox("Do you want to mark QSLs as
> > printed (QSL SENT = F) and record date printed?", MB_YESNO +
> > MB_ICONQUESTION + mb_defbutton2, "QSL Printing")
>
>
> > 4. The KEY phrase is: + mb_defbutton2, <= this hi light the NO
> > button if not there change
>
> > The command on line 3 does a few things
> > A. Print the message Box with the question .
>
> > B. Print the date when the card was printed and put that date in the
> >  "MAILED" field if you have it open on your default screen.
>
> > C.  And Hi-lights the "NO" button. So even if you hit ENTER the
> > default is still NO. You can always go back and click YES when you
> > are ready to up date the log data.
> _______________________________________________
> LOGic mailing list
> LOGic@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.518 / Virus Database: 316 - Release Date: 9/11/03