[Logic] Re: OOPS, Logbook of the World (LOTW) Beta Test Tutorial

[R Johnson]

That's 01/01/1998 NOT 10/10/1998. SRI Fat Fingers !!!

73 Bob

At 11:09 7/26/2003 , you wrote:
>Hi Jim:
>At present LoTW will only accept QSO on or after 01/10/1998 so if you are trying
>to include any 1998 QSO's LoTW will kick you out when you try to upload your .TQ8
>file.
>
>Create your ADIF file as Art Tan described and set the export date for after 01 Jan 1998.
>I had to do this as my log went back to the 1970's.  Worked FB.
>
>I'm not sure about Hawaii, may be a bug, remember that this is just a Beta test
>
>Your error line 21 may be due to your date range.  In any case use notepad or wordpad
>to view your ADIF file and look at line 21 for something abnormal.
>
>I've got about 6000 Q's loaded into LoTW since June.  Works great once you get past the
>initial startup.
>
>73 es GL
>Bob, K1VU
>
>
>
>At 19:37 7/24/2003 , you wrote:
> >Ok,  gave this a try --- didn't work.
> >
> >1.  Hawaii is NOT in the list of United States,
> >seems rather odd,  so I could fill in neither State
> >nor County.  ARRL form would allow nothing except
> >a selection from the list from which Hawaii was not
> >included.
> >
> >2.  I prepared an ADIF file from my Logic 6 log;
> >however,  I had no idea how to prepare  that
> >I only wanted QSO's from Nov. 6,  1996 to be
> >selected.  So I did the entire log which goes
> >back to late 1991.  Then I used Notepad to
> >"edit" the log, which I did by deleting all QSO's
> >from the long, long ADIF file.  So first entry in the
> >EXORT.ADI file was: 
> >
> ><call:5>9K2GS <qso_date:8:d>19961217 
> ><time_on:6>042300 <rst_sent:2>59 <rst_rcvd:2>59 
> ><mode:3>SSB <band:3>20M <dxcc:3:n>348 
> ><qsl_sent:1>Y <qsl_rcvd:1>Y <comment:8>DXCCSUB: 
> ><operator:4>KH7M 
> ><notes:21:m>KUWAIT|/ABDUL|KUWAIT|
> ><cont:2>AS <cqz:2>21 <ituz:2>39 <eor>
> >
> >The above seems to be one complete ADIF log entry.  There
> >was nothing else other than a great long list of the above
> >sort of entries.
> >
> >So,  I proceeded to the place where you do the process
> >to "sign" the log;  this is where the process stopped.
> >I was given the message, "The data in line 21 is
> >outside the range specified"  or some such.  It went
> >away before I could respond.  Next thing I was told
> >was that the program was no longer responding,  hi.
> >
> >Any thought on what to do now,  start over or????
> >
> >73,  Jim  KH7M
> >
> >
> >_______________________________________________
> >LOGic mailing list
> >LOGic@mailman.qth.net
> >http://mailman.qth.net/mailman/listinfo/logic
>
>_______________________________________________
>LOGic mailing list
>LOGic@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/logic