[Logic] Problems Loging Zone Data

[PDA]

Hi Bob:

Thanks for your followup.  I apologize for your not 
getting a response to your previous request.  I do 
answer all emails, but it must have gotten lost or 
trapped by the spam filter or something.

Anyway, Art is 100% correct--most US calls will not log 
CQ Zone because it is ambiguous.  I will most likely be 
able to do as Art suggests and get the zones after a 
callbook lookup or just manually entering the state.

Also, make sure that you are adding a new QSO.  Click 
the + button, type a call, and press tab.  The following 
calls should all log the CQ Zone:  DX4DX, FR0G, 
K6CAL

Does it log DXCC OK?

If still no luck, pse call me, or email me your phone# 
and I'll call you.  It has to be something simple.

Tnx & 73,

Dennis WN4AZY

To:             	Arthur Tan <agtan@lomag.net>
From:           	Bob Johnson <rjohnson@tmlp.com>
Subject:        	Re: [Logic] Problems Loging Zone Data
Copies to:      	logic@mailman.qth.net, PDA <dennis@hosenose.com>
Send reply to:  	logic@mailman.qth.net
	<mailto:logic-request@mailman.qth.net?subject=3Dsubscribe>
	<mailto:logic-request@mailman.qth.net?subject=3Dunsubscribe>
Date sent:      	Thu, 10 Jul 2003 12:20:31 -0400

> Hi Art:
> I'm back to my old problem. I've tried the LOGic 6 Beta and a
> couple of the LOGic 6 DEMO's and the problem still exists.
> 
> I was wondering if you ever heard anything back from Dennis
> on this problem when you CC:'d him.  I never did.
> 
> Thanks for your re-statement of the problem, you did an excellent
> job and put it very clear terms that are far more understandable
> than my attempts.
> 
> TNX es 73
> Bob, K1VU
> 
> At 01:22 AM 02/19/02 , Arthur Tan wrote:
> >Hi Bob,
> >
> >On Mon, Feb 18, 2002 at 01:43:28PM -0500, Bob Johnson wrote:
> >
> >> Nope, didn't do a thing as far as CQZ and ITUZ went !!!
> >
> >> The VALID zone data simply is just not getting transferred from the
> >> "Info Window" to the "Log Window", mainly for domestic QSO's.=A0
> >> Why only US, not foreign ???
> >
> >
> >I can't speak about the guts of the program but I think this is in
> >part, because there are too many unresolvable (at least from the
> >software's point of view) CQ and ITU Zones when you first enter in a
> >U.S. callsign.=A0 Take at look at the Prefix Table.=A0 Most of the CQ a=
nd
> >ITU Zones for the "K" callsigns are blank (I'm not talking about the
> >ones listed by state in which the zone is filled in).
> >
> >As an illustration: Go to Tools|Setup|Prefix Table and do a (G)et.
> >Type in AB4RL.=A0 You're going to first jump to a generic K4,N4,W4 line
> >where the zones are not filled in (because amonst other things, W4 is
> >one of those cases where we occupy more than one zone - it's somewhat
> >indeterminate) based on callsign alone.=A0 This is what happens when yo=
u
> >try and log a U.S. call and the zone info is not automatically filled
> >in from the Prefix Table (despite the presence of the expressions
> >under Log|Setup|Copy from Prefix Table).
> >
> >Where I think LOGic should work but doesn't right now is if you have
> >both Info and Callbook open.=A0 You type in AB4RL; see that I'm from FL=
;
> >and all the info is filled out in the logform, EXCEPT zone information
> >is still not filled in even though it's listed correctly in the Info
> >window.=A0 
> >
> >Maybe LOGic should be programmed to get the Zone not just from the
> >Prefix Table but also from the Callbook info i.e. work in the same
> >manner as the Info window works.
> >
> >> Thanks for your help.=A0 Can you think of anthing else to try?=A0 I h=
ave
> >> CC:'d Dennis on these messages but haven't heard anything from him
> >> yet.
> >
> >I've Cc: Dennis on this one too.=A0 I hope what I've wrote makes some
> >sense to both you and him.
> >
> >73, Art AB4RL
> >_______________________________________________
> >LOGic mailing list
> >LOGic@mailman.qth.net
> ><http://mailman.qth.net/mailman/listinfo/logic>http://mailman.qth.net/m=
ail
> man/listinfo/logic
> > 
> 
> _______________________________________________
> LOGic mailing list
> LOGic@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
> 


=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D
WHEN REPLYING, PLEASE INCLUDE A COPY OF
THIS MESSAGE IN YOUR REPLY.  THANK YOU.

Personal Database Applications
1323 Center Dr.
Auburn, GA  30011-3318 USA

770-307-1511 
770-307-0760 Fax

Check out our web page! Tell others about it!  Thanks.

          http://www.hosenose.com/