[Logic] Re: LOGic Two Radio Setup

[Steve Massey]

Yep that is the way to do it I guess Art but your rite on the monitor real
estate again.
But that must be easier than trying to go through the setup each time...Tnxs
for the info,

Steve

----- Original Message -----
From: "Arthur Tan" <ab4rl@lomag.net>
To: "LOGic reflector" <logic@mailman.qth.net>
Sent: Thursday, July 10, 2003 1:25 PM
Subject: Re: [Logic] Re: LOGic Two Radio Setup


> From Steve Massey <N6TT@hotmail.com>:
>
> > Well Im not sure if this is the easiest or correct way of changing
> > radios to log but the way it works for me is to first Set your
> > radios up in TOOLS,SETUP,GENERAL HAM SETUP. Then when you want to
> > change radios to LOG a contact you click the LOG button on your open
> > LOG FORM, from there go down to the bottom and choice SETUP this
> > opens a window where you choose RIG,ROTOR & TERMINAL, this allows
> > you to choose RADIO 1,2,3 or 4, plus TERMINAL and ROTOR. Then choose
> > OK and your set.
>
> > If there is a better way Id like to know. I know Dennis reads these
> > posts so maybe he has some words of wisdom.  It sure would be nice
> > if you could RIGHT CLICK on each radio to change them to LOG, or
> > something along those lines.
>
> Hi Steve,
>
> Actually, just thinking out loud here but maybe this is THE way to do
> it.  I think LOGic 6 allows you to have more than one LOGFORM open at
> the same time.  You could assign each logform to a different radio
> under your procedure.  In fact you could even rename each logform
> "Radio 1, Radio 2, Radio 3" and then use Window as a drop-down menu to
> quickly bring up each form if you don't want to keep them open all at
> the same time.  (Getting back to the problem of not enough monitor
> real estate again...)
>
> Interesting...
>
> 73, Art AB4RL
> _______________________________________________
> LOGic mailing list
> LOGic@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>