[Logic] Problems Loging Zone Data

[Bob Johnson]

Hi Art:
I'm back to my old problem. I've tried the LOGic 6 Beta and a
couple of the LOGic 6 DEMO's and the problem still exists.

I was wondering if you ever heard anything back from Dennis
on this problem when you CC:'d him.� I never did.

Thanks for your re-statement of the problem, you did an excellent
job and put it very clear terms that are far more understandable
than my attempts.

TNX es 73
Bob, K1VU

At 01:22 AM 02/19/02 , Arthur Tan wrote:
>Hi Bob,
>
>On Mon, Feb 18, 2002 at 01:43:28PM -0500, Bob Johnson wrote:
>
>> Nope, didn't do a thing as far as CQZ and ITUZ went !!!
>
>> The VALID zone data simply is just not getting transferred from the
>> "Info Window" to the "Log Window", mainly for domestic QSO's.�
>> Why only US, not foreign ???
>
>
>I can't speak about the guts of the program but I think this is in
>part, because there are too many unresolvable (at least from the
>software's point of view) CQ and ITU Zones when you first enter in a
>U.S. callsign.� Take at look at the Prefix Table.� Most of the CQ and
>ITU Zones for the "K" callsigns are blank (I'm not talking about the
>ones listed by state in which the zone is filled in).
>
>As an illustration: Go to Tools|Setup|Prefix Table and do a (G)et.
>Type in AB4RL.� You're going to first jump to a generic K4,N4,W4 line
>where the zones are not filled in (because amonst other things, W4 is
>one of those cases where we occupy more than one zone - it's somewhat
>indeterminate) based on callsign alone.� This is what happens when you
>try and log a U.S. call and the zone info is not automatically filled
>in from the Prefix Table (despite the presence of the expressions
>under Log|Setup|Copy from Prefix Table).
>
>Where I think LOGic should work but doesn't right now is if you have
>both Info and Callbook open.� You type in AB4RL; see that I'm from FL;
>and all the info is filled out in the logform, EXCEPT zone information
>is still not filled in even though it's listed correctly in the Info
>window.� 
>
>Maybe LOGic should be programmed to get the Zone not just from the
>Prefix Table but also from the Callbook info i.e. work in the same
>manner as the Info window works.
>
>> Thanks for your help.� Can you think of anthing else to try?� I have
>> CC:'d Dennis on these messages but haven't heard anything from him
>> yet.
>
>I've Cc: Dennis on this one too.� I hope what I've wrote makes some
>sense to both you and him.
>
>73, Art AB4RL
>_______________________________________________
>LOGic mailing list
>LOGic@mailman.qth.net
><http://mailman.qth.net/mailman/listinfo/logic>http://mailman.qth.net/mail
man/listinfo/logic
>