[Logic] The Future of LOGic (was Test)

Tue, 08 Jul 2003 18:49:04 -0400

Hi Carl:
This is what I'm talking about.  Here is your reply to Arts reply to my
message going back to Feb. 2003.

Art and I both CC'd Dennis on the problem.  I never got any reply.  I'll
have to contact Art to see is he got any acknowledgment of the problem.

It's not that the "Log Window" is "Too Busy", It's just that the "Info
Window" data doesn't get transferred when it COULD or SHOULD.

73
Bob, K1VU

**********Your Reply*****************************
Subject: Re: [Logic] Problems Loging Zone Data
MIME-Version: 1.0
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2600.0000
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;charset="iso-8859-1"
Sender: [email protected]
Errors-To: [email protected]
X-BeenThere: [email protected]
X-Mailman-Version: 2.0.8
Precedence: bulk
Reply-To: [email protected]
List-Help:
<<mailto:[email protected]%3Fsubject=help>mailto:logic-request@m
ailman.qth.net?subject=help>
List-Post: <<mailto:[email protected]>mailto:[email protected]>
List-Subscribe:
<<http://mailman.qth.net/mailman/listinfo/logic>http://mailman.qth.net/mailm
an/listinfo/logic>,
 <<mailto:[email protected]%3Fsubject=subscribe>mailto:logic-re
[email protected]?subject=subscribe>
List-Id: LOGic is open to all radio amateurs for discussion of LOGic logging
program.  <logic.mailman.qth.net>
List-Unsubscribe:
<<http://mailman.qth.net/mailman/listinfo/logic>http://mailman.qth.net/mailm
an/listinfo/logic>,
 <<mailto:[email protected]%3Fsubject=unsubscribe>mailto:logic-
[email protected]?subject=unsubscribe>
List-Archive:
<<http://mailman.qth.net/mailman/private/logic/>http://mailman.qth.net/mailm
an/private/logic/>
Date: Tue, 19 Feb 2002 09:59:56 -0400
X-RCPT-TO: <[email protected]>
Status: U
X-UIDL: 302123481

You always make good sense Art and you hit the nail right on the head on
this one also.

73,�� Carl�� VE9OV

----- Original Message -----
From: "Arthur Tan" <[email protected]>
To: <[email protected]>
Cc: "PDA" <[email protected]>
Sent: Tuesday, February 19, 2002 1:22 AM
Subject: Re: [Logic] Problems Loging Zone Data

> Hi Bob,
>
> On Mon, Feb 18, 2002 at 01:43:28PM -0500, Bob Johnson wrote:
>
> > Nope, didn't do a thing as far as CQZ and ITUZ went !!!
>
> > The VALID zone data simply is just not getting transferred from the
> > "Info Window" to the "Log Window", mainly for domestic QSO's.
> > Why only US, not foreign ???
>
>
> I can't speak about the guts of the program but I think this is in
> part, because there are too many unresolvable (at least from the
> software's point of view) CQ and ITU Zones when you first enter in a
> U.S. callsign.� Take at look at the Prefix Table.� Most of the CQ and
> ITU Zones for the "K" callsigns are blank (I'm not talking about the
> ones listed by state in which the zone is filled in).
>
> As an illustration: Go to Tools|Setup|Prefix Table and do a (G)et.
> Type in AB4RL.� You're going to first jump to a generic K4,N4,W4 line
> where the zones are not filled in (because amonst other things, W4 is
> one of those cases where we occupy more than one zone - it's somewhat
> indeterminate) based on callsign alone.� This is what happens when you
> try and log a U.S. call and the zone info is not automatically filled
> in from the Prefix Table (despite the presence of the expressions
> under Log|Setup|Copy from Prefix Table).
>
> Where I think LOGic should work but doesn't right now is if you have
> both Info and Callbook open.� You type in AB4RL; see that I'm from FL;
> and all the info is filled out in the logform, EXCEPT zone information
> is still not filled in even though it's listed correctly in the Info
> window.
>
> Maybe LOGic should be programmed to get the Zone not just from the
> Prefix Table but also from the Callbook info i.e. work in the same
> manner as the Info window works.
>
> > Thanks for your help.� Can you think of anthing else to try?� I have
> > CC:'d Dennis on these messages but haven't heard anything from him
> > yet.
>
> I've Cc: Dennis on this one too.� I hope what I've wrote makes some
> sense to both you and him.
>
> 73, Art AB4RL
> ____________________________________
At 04:18 PM 07/08/03 , you wrote:
>>Now if we could only get the data from the "Info Window" transferred to
>> the "Log Window". Oh, Well !!!
>>
>> 73
>> Bob, K1VU
>
>
>
>Re the above wish, why would you want that?? The Log Window is busy enough
>as is, at least with my set-up.
>
>The main reason that the list is presently quiet is that we are mostly
>'happy campers', doing our thing with little to complain about.
>
>We usually all come out of the wood work when a major new version comes out,
>helping each other with any emerging growing pains; otherwise, life just
>goes on while Dennis creates new and amazing software.
>
>73,�� Carl� VE9OV
>
>
>
>_______________________________________________
>LOGic mailing list
>[email protected]
><http://mailman.qth.net/mailman/listinfo/logic>http://mailman.qth.net/mail
man/listinfo/logic
> 