[Logic] add space to labels

[Arthur Tan]

Ken,

I looked at "QSL labels with address, 3 across" and there is not a lot
of room to move the first line down.  One possibility is that you take
the QSL MSG (the very bottom) line out, then you have one row of
spacing to work with.

Or...

You replace the the top QSO label (and leave the bottom address label
alone) with another design such as "mutliple qso labels, 3 across" or
"multiple and single qso label, 3 across" something like that...

If you're up for any of these, I can show you how to move or cut and
paste the fields around.

73, Art AB4RL



>From Ken Goetz <kgoetz@mhcable.com>:

> I am having a slight problem when printing labels. Every 2nd or 3rd
> sheet of labels will print with part of the info (either QSL or
> address) a bit too high in the label. This causes the writing to be
> split between 2 labels. (I realize this is a problem with my printer
> feed). Is there an easy way to add a blank line at the top of each
> label? While not fixing the printer, this would be a "work-around
> for the problem. I am printing "QSL labels with address, three
> across" and I am using Avery 5160 labels.

> Thanks,
> Ken N2SQW