[Logic] DXCC Spots Configuration

Tue, 15 Apr 2003 00:04:23 -0400

Hank and Reflectees...

I made a boo-boo.  I should not have said that putting a 4 by itself
is the same as putting 1234.  They are actually different on
reflection.  If you want to track everything, then by all means use
1234.  Sorry for the mix-up.

73, Art AB4RL

>From Arthur Tan <[email protected]>:

> Hi Hank,
> 
> From Hank Phillips <[email protected]>:
> 
> > Here is what I am not sure I understand: I have a couple of DXCC
> > submissions now, and they currently track, band, and mode, but not
> > band/mode (to clarify: I work them on 20 ssb, and 15 cw, I have two
> > modes and two bands confirmed when I get the card, but working on 20
> > cw and 15 ssb gains no additional credit, even for the Challenge
> > Award).  Does the setup in Logic not understand this, or do I have
> > it configured incorrectly, or maybe I don't understand the rules.
> 
> 
> LOGic does not understand the way the DXCC Challenge works, nor does
> it need to.  Basically the Band Table gives you total control via the
> "1234" settings.  Note that if you put 1234, it's really the same
> thing as entering 4 by itself.  If you really want to just track spots
> in the Spot Log by Band and Mode but not Band/Mode then just put "23"
> or "123" in each of the boxes.  Heck, if you don't have antennas on
> cretain bands, leave the boxes for certain bands completely blank.
> Then, spots on those bands won't even show up as needed in the spot
> log.
> 
> 73, Art AB4RL
> 
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic