[Logic] PCI serial card

[logic@mailman.qth.net]

Carl and group: The PCI400HS arrived from Byterunner a couple days ago....It
worked perfectly, excately the way it was suppose to work which is unusual
for me:-)
I highly recommend this 4 port card, it was a totally plug and play
operation...much different then when I originally set everything up quite a
few years ago with a ISA card. The only problem I had was with the software
to control the Alpha 87a amp, I had to finally download a zipped file from
ALpha's website which worked fine , the original disks that came from Alpha
with it seem to be corrupted....
Thanks everybody for the help - Gee ive got 2 monitors going now and
everything is computerized and working great...I guess its time to do some
operating...Bought a MFJ-890 DX beacon monitor which works great.
73 / Steve N6TT

----- Original Message -----
Wrom: SWZIDREXCAXZOWCONEUQZAAFXISHJEXXI
To: "Carl Smidt" <smidtca@sprint.ca>
Sent: Wednesday, September 11, 2002 6:14 PM
Subject: Re: [Logic] PCI serial card


> Thanks Carl, I will check them out..
> 73/steve
> ----- Original Message -----
> Wrom: MQZUIVOTQNQEMSFDULHPQQWOYIYZUNNY
> To: <n6tt@hotmail.com>
> Sent: Wednesday, September 11, 2002 6:10 PM
> Subject: Re: [Logic] PCI serial card
>
>
> > Steve, try Byterunner at: http://www.byterunner.com.  I got their four
> port
> > PCI400HS, excellent card.
> >
> > 73,   Carl   VE9OV
> > ----- Original Message -----
> > Wrom: CGPKYLEJGDGVCJVTLB
> > To: <logic@mailman.qth.net>
> > Sent: Wednesday, September 11, 2002 8:06 PM
> > Subject: [Logic] PCI serial card
> >
> >
> > >
> > >  Well now that ive got the dual monitors working Im onto mulitiple
> serial
> > > ports. I had everything working on my old system that was using a 4
com
> > port
> > > ISA card but it wont work with the new system using PCI -
> > >
> > > Im running Windows ME on this system and I have one PCI slot left
open.
> > What
> > > brand of card  are you guys using to obtain 4 additional Com or serial
> > > ports. Where did you buy them?
> > >   Unless its easier to go USB without conflicts?  Im using the two
built
> > in
> > > serial ports already so Im hoping to buy a plug and play card with out
> > alot
> > > of hassels setting the com ports as I dont know what im doing with
these
> > > dang computers...Thank God for system restore to a earlier date that I
> > found
> > > out about:-)
> > > Any help appreciated, either here or direct. 73 / Steve N6TT
> > > N6TT@hotmail.com