[Logic] Fw: QSL Check-In LOGic 6
stern eli
[email protected]
Fri, 29 Mar 2002 18:26:53 +0200
Hi Carl
Hit alt+c when the log screen is active - the upper line in the log
screen is blue
Give it a little time It works fine for me
If the active window is the list screen the first alt+c will activate
the log screen and the second alt+c will do the trick.
Hope it will work for you
Eli 4z5is
Stern Eli Advocate & Notary
ham radio callsign 4Z5 IS
____________________________________
[email protected] OFFICE
Haberman Dovev & Stern advocates & notarie Office
51 Wizman St Tel Aviv Israel
FAX 00972 3 6962206
[email protected] HOME
2 sagie st P.O.BOX 728 Reut ISRAEL 71908
Fax 00 972 8 9710010
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Carl Smidt
Sent: Friday, March 29, 2002 2:36 PM
To: [email protected]
Subject: Re: [Logic] Fw: QSL Check-In LOGic 6
OOOOps..... I found it Mac, sure is hard to see, that checks in the card
ok,
including the correct date. I would prefer the use of 'Alt+C' though.
Thanks
Mac.
73, Carl VE9OV
----- Original Message -----
From: "Mac McDaniel" <[email protected]>
To: <[email protected]>
Sent: Friday, March 29, 2002 4:36 AM
Subject: Re: [Logic] Fw: QSL Check-In LOGic 6
> I thought Dennis forgot to put it on for a while. It's on the MAIN
> logform or which ever logfom you have open. It says
> "Log Terminal CW Keyer" right under the logform name.
> It is real light. Almost grayed out. It's hard to see.
>
> 73, Mac N0OB
>
> > Hi Mac,
> >
> > Where do you find 'Log/Check in QSL card' in LOGic 6 :>)
> >
> > 73, Carl VE9OV
> >
> >
> > ----- Original Message -----
> > From: "Mac McDaniel" <[email protected]>
> > To: <[email protected]>
> > Sent: Thursday, March 28, 2002 10:24 PM
> > Subject: Re: [Logic] Fw: QSL Check-In LOGic 6
> >
> >
> > > I noticed that it would not work manually but, you can click
> > > log/Check in QSL card. It still works. Alt+C is easier. I'm sure
> > > Dennis will get to fixing it.
> > > 73, Mac N0OB
> > >
> > >
> > > > Hi,
> > > >
> > > > For the reflector's information.
> > > >
> > > > 73, Carl VE9OV
> > > > ----- Original Message -----
> > > > From: "Carl Smidt" <[email protected]>
> > > > To: <[email protected]>
> > > > Sent: Thursday, March 28, 2002 9:27 PM
> > > > Subject: QSL Check-In LOGic 6
> > > >
> > > >
> > > > > Dear Dennis,
> > > > >
> > > > > In checking in some QSL cards I have discovered what appears
to be
a
> > > bug.
> > > > > But first for your information, the old 'Alt + C' no longer
works
> for
> > > > check
> > > > > in's. When I go to fill in the QSLRDATE manually a problem
occurs
> when
> > > > > trying to fill in the year. The first three numbers are
entered
ok,
> > but
> > > > when
> > > > > the last number is attempted to be entered, a screen pops up
saying:
> > > Error
> > > > > 2034 "Date/datetime evaluated to an invalid value, ...etc.,
etc.
> > Attempt
> > > > to
> > > > > continue, Yes No." When I click 'Yes', another screen pops
up,
> menu
> > > > like,
> > > > > its heading is "OPEN". Below it says, "Look in: LOGic 6";
listed
are
> > the
> > > > > various LOGic folders. When I click 'Cancel' and then again
attempt
> > to
> > > > > enter the last number of the year , the first screen pops up
again.
> > > > "Attempt
> > > > > to continue, Yes No" , I press yes and then very quickly
try
to
> > type
> > > > in
> > > > > the last number of the year, ie., '2'. When that is done, the
second
> > > > screen
> > > > > described above, pops up again. When I click 'Cancel', the
first
> > screen
> > > > pops
> > > > > up again, when I click 'Yes' to continue, I then get my normal
log
> > > screen
> > > > > with the year 2002 entered ok. However, when I then make the
browse
> > > window
> > > > > active, the 'year' defaults to 1920. That's the way all of my
> check-in
> > > > > entries end up and a very time consuming exercise, by the way.
> > > > > What happened to the 'Alt + C, followed by the 'fill in the
date
> > > received'
> > > > > query??? It was quick and to the point.
> > > > > Fun and games, right Dennis? :>)
> > > > >
> > > > > 73, Carl VE9OV
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > LOGic mailing list
> > > > [email protected]
> > > > http://mailman.qth.net/mailman/listinfo/logic
> > > >
> > >
> > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> >
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
>
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>
_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---